Environmentally assisted, sustained-load crack growth in powder metallurgy nickel-based superalloys

被引:10
|
作者
Huang, Z [1 ]
Iwashita, C
Chou, I
Wei, RP
机构
[1] Eastman Kodak Co, Rochester, NY 14650 USA
[2] LSI Log, Milpitas, CA 95035 USA
[3] Appl Mat Inc, Santa Clara, CA 95054 USA
[4] Lehigh Univ, Dept Mech Engn & Mech, Bethlehem, PA 18015 USA
基金
美国国家科学基金会;
关键词
D O I
10.1007/s11661-002-0177-3
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
To examine the influence of niobium (Nb) on sustained-load crack growth (SLCG) in oxygen, three powder metallurgy (P/M) nickel-based superalloys, with nominal compositions similar to IN 100, but with 0, 2.5, and 5 wt pct of Nb, are used. These alloys are gamma-prime (y') strengthened and have comparable volume fractions (53 vol pct) of y' precipitates. The SLCG experiments are conducted in high-purity oxygen and argon at 873, 923, and 973 K. The environmental cracking sensitivity (ECS) for the alloys with 2.5 and 5 wt pct of Nb is consistent with that of INCONEL 718 and supports the previously identified role of Nb-rich carbides in enhancing crack growth. The susceptibility of the Nb-free alloy to oxygen, however, is much greater than expected. The apparent activation energy for crack growth in oxygen was found to depend on stress-intensity-factor (K) levels for the Nb-containing alloys and ranged from about 320 to 260 kJ/mol for K levels of 35 to 60 Mparootm. It was nearly independent of K at about 250 kJ/mol for the Nb-free alloy. The results are discussed in terms of the rate-controlling process and of the mechanism for crack-growth enhancement.
引用
收藏
页码:1681 / 1687
页数:7
相关论文
共 50 条
  • [1] Environmentally assisted, sustained-load crack growth in powder metallurgy nickel-based superalloys
    Zhifan Huang
    Carl Iwashita
    Irene Chou
    Robert P. Wei
    Metallurgical and Materials Transactions A, 2002, 33 : 1681 - 1687
  • [2] Microstructurally sensitive crack nucleation around inclusions in powder metallurgy nickel-based superalloys
    Jiang, J.
    Yang, J.
    Zhang, T.
    Zou, J.
    Wang, Y.
    Dunne, F. P. E.
    Britton, T. B.
    ACTA MATERIALIA, 2016, 117 : 333 - 344
  • [3] FUNCTION OF MICROELEMENT Hf IN POWDER METALLURGY NICKEL-BASED SUPERALLOYS
    Zhang Yiwen
    Hu Benfu
    ACTA METALLURGICA SINICA, 2015, 51 (08) : 967 - 975
  • [4] MORPHOLOGICAL INSTABILITY OF γ′ PHASE IN NICKEL-BASED POWDER METALLURGY SUPERALLOYS
    Hu Benfu
    Liu Guoquan
    Wu Kai
    Tian Gaofeng
    ACTA METALLURGICA SINICA, 2012, 48 (03) : 257 - 263
  • [5] Status and development of powder metallurgy nickel-based disk superalloys
    Yang, Lebiao
    Ren, Xiaona
    Ge, Changchun
    Yan, Qingzhi
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2019, 110 (10) : 901 - 910
  • [6] Oxidation Behavior of Different Powder Metallurgy Nickel-Based Superalloys
    Xiong, Jiangying
    Chao, Yin
    Zou, Zhihuan
    Jing, Wu
    Yang, Jinlong
    Huo, Hongguang
    RARE METAL MATERIALS AND ENGINEERING, 2024, 53 (12) : 3475 - 3484
  • [7] On the Influence of Nb/Ti Ratio on Environmentally-Assisted Crack Growth in High-Strength Nickel-Based Superalloys
    Nemeth, A. A. N.
    Crudden, D. J.
    Collins, D. M.
    Kuksenko, V.
    Liebscher, C. H.
    Armstrong, D. E. J.
    Wilkinson, A. J.
    Reed, R. C.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2018, 49A (09): : 3923 - 3937
  • [8] On the Influence of Nb/Ti Ratio on Environmentally-Assisted Crack Growth in High-Strength Nickel-Based Superalloys
    A. A. N. Németh
    D. J. Crudden
    D. M. Collins
    V. Kuksenko
    C. H. Liebscher
    D. E. J. Armstrong
    A. J. Wilkinson
    R. C. Reed
    Metallurgical and Materials Transactions A, 2018, 49 : 3923 - 3937
  • [9] Thermo-mechanical fatigue crack growth in a nickel-based powder metallurgy superalloy
    Zhang, Lu
    Wang, Yuzhuo
    Yu, Zhiwei
    Jiang, Rong
    Baxevanakis, Konstantinos P.
    Roy, Anish
    Zhao, Liguo
    Tian, Gaofeng
    Song, Yingdong
    INTERNATIONAL JOURNAL OF FATIGUE, 2024, 186
  • [10] Crack growth behaviour of a nickel-based powder metallurgy superalloy under elevated temperature
    Yang, Hongqin
    Bao, Rui
    Zhang, Jianyu
    Peng, Lei
    Fei, Binjun
    INTERNATIONAL JOURNAL OF FATIGUE, 2011, 33 (04) : 632 - 641