Mathematical Simulation on Slag Entrainment in Bottom-blowing Gas Ladle with Immersed Cylinder

被引:6
|
作者
Zhang, De-hui [1 ]
Shen, Ming-gang [1 ]
Wu, Chao [1 ]
Qi, Qing-hua [1 ]
Xu, Qing [1 ]
Zhang, Zhen-shan [1 ]
机构
[1] Univ Sci & Technol Liaoning, Sch Mat & Met, Anshan 114051, Liaoning, Peoples R China
关键词
ladle; bottom-blowing argon; immersed cylinder; slag entrainment; REFINING LADLE; CLEAN STEEL; TECHNOLOGY; FLOW;
D O I
10.1016/S1006-706X(15)30137-0
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
A flow field mathematical model of the molten steel in a 150 t bottom blowing gas ladle has been established. The ladle blowing argon process was simulated by mixture multiphase model. The flow of the liquid steel and the phenomenon of slag entrainment on the surface of the liquid steel in bottom blowing gas ladle with immersed cylinder were studied. On the basis of the effects of the gas flow rate and the way of blowing on the flow state of the top slag and mixing of molten steel, the critical gas flow rate with the immersed cylinder was determined. The results show that the flow distribution of the liquid steel tends to be uniform, the liquid surface velocity decreases, the critical gas flow of slag entrainment increases and the mixing time is shortened in the ladle when an immersed cylinder is applied.
引用
收藏
页码:48 / 52
页数:5
相关论文
共 50 条
  • [1] Mathematical simulation on slag entrainment in bottom-blowing gas ladle with immersed cylinder
    De-hui Zhang
    Ming-gang Shen
    Chao Wu
    Qing-hua Qi
    Qing Xu
    Zhen-shan Zhang
    Journal of Iron and Steel Research International, 2015, 22 : 48 - 52
  • [2] STUDY ON STIRRING BEHAVIOR OF LIQUID STEEL IN BOTTOM-BLOWING LADLE WITH IMMERSED CYLINDER
    Shen, M. G.
    Zhang, D. H.
    Wu, C.
    Xu, Q.
    Qi, Q. H.
    METALURGIJA, 2016, 55 (04): : 601 - 604
  • [4] Study on Mixing Time in Bottom-Blowing Ladle with Immersed Tube
    Qi, Qinghua
    Shen, Minggang
    Zhang, Dehui
    Wu, Tao
    ADVANCED ENGINEERING MATERIALS III, PTS 1-3, 2013, 750-752 : 400 - +
  • [5] Study on Amplitude of The Surface of Liquid Steel in Bottom-Blowing Ladle with Immersed Tube
    Zhang, Dehui
    Shen, Minggang
    Qi, Qinghua
    Kuang, Jinwei
    RESOURCES AND SUSTAINABLE DEVELOPMENT, PTS 1-4, 2013, 734-737 : 1511 - 1515
  • [6] Study on temperature/stress distribution in porous plug for bottom-blowing ladle furnace
    Li, Bing-Qiang
    Li, Zhi-Qiang
    Liu, Tao
    Yu, Jing-Kun
    Dongbei Daxue Xuebao/Journal of Northeastern University, 2010, 31 (07): : 970 - 972
  • [7] Simulation of Inclusion Removal in Bottom-blowing Ladle with Tracking the Collision of Inclusions and Bubbles in Transient Time Steps
    Liu, Kai
    Zhang, Lin
    Cui, Henan
    Li, Tao
    Tan, Min
    Zhang, Fucheng
    ISIJ INTERNATIONAL, 2023, 63 (10) : 1677 - 1686
  • [8] PHYSICAL AND MATHEMATICAL MODELING OF INCLUSION REMOVAL WITH GAS BOTTOM-BLOWING IN CONTINUOUS CASTING TUNDISH
    Zhang, M. J.
    Gu, H. Z.
    Huang, A.
    Zhu, H. X.
    Deng, C. J.
    JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 2011, 47 (01) : 37 - 44
  • [9] Simulation and application of pulsating bottom-blowing in EAF steelmaking
    Wei, Guangsheng
    Zhu, Rong
    Wang, Yun
    Dong, Kai
    Wu, Xuetao
    Liu, Runzao
    Chen, Fengwu
    IRONMAKING & STEELMAKING, 2018, 45 (09) : 847 - 856
  • [10] Simulation and Application of Ruhrstahl–Heraeus (RH) Reactor with Bottom-Blowing
    Jianfeng Dong
    Chao Feng
    Rong Zhu
    Guangsheng Wei
    Juanjuan Jiang
    Shengzhen Chen
    Metallurgical and Materials Transactions B, 2021, 52 : 2127 - 2138