Microstructural Evolution of Magnesium Alloy during Hot Compression

被引：0
|
作者：
Li, Xingcheng [1 ]
Lu, Yalin [1 ]
Wang, Jiangtao [1 ]
Dou, Lin [1 ]
机构：
[1] Jiangsu Univ Technol, Changzhou, Peoples R China
来源：
ADVANCED RESEARCH IN MATERIAL SCIENCE AND MECHANICAL ENGINEERING, PTS 1 AND 2 | 2014年 / 446-447卷
关键词：
AZ31 Magnesium Alloy; Hot-Compression; Micro structural Evolution;
D O I：
10.4028/www.scientific.net/AMM.446-447.158
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Hot compression of AZ31 magnesium alloy was carried out at deformation temperatures of 523-723K and strain rates of 0.01-10s(-1). The effects of deformation process on the microstructure and flow stress were investigated. The flow stress curves showed the characteristic of dynamic recrystallization (DRX) with deformation process parameters. Optical microscopy and TEM observations indicated that dynamic recrystallisation and twins' structure were found during hot compression. Deformation mechanism of AZ31 magnesium alloy at elevated temperature was discussed in this paper.
引用
收藏
页码：158 / 163
页数：6
相关论文
共 50 条
  • [1] Microstructural evolution of AZ61 magnesium alloy during hot deformation
    Zhou, HT
    Zeng, XQ
    Liu, LL
    Dong, J
    Wang, QD
    Ding, WJ
    Zhu, YP
    MATERIALS SCIENCE AND TECHNOLOGY, 2004, 20 (11) : 1397 - 1402
  • [2] Microstructural evolution during the hot deformation of magnesium alloy AZ31
    Grosvenor, A
    Davies, CHJ
    THERMEC'2003, PTS 1-5, 2003, 426-4 : 4567 - 4572
  • [3] Microstructural evolution and flow behaviour during hot compression of twin roll cast ZK60 magnesium alloy
    Liu, Z. Y.
    Duan, A. J.
    Hou, Y. H.
    Kang, S.
    Cho, J.
    MATERIALS SCIENCE AND TECHNOLOGY, 2010, 26 (12) : 1429 - 1438
  • [4] MICROSTRUCTURAL EVOLUTION AND FLOW BEHAVIOR OF TWIN-ROLL CAST AZ41 MAGNESIUM ALLOY DURING HOT COMPRESSION
    Liu, Zhiyi
    Chen, Xu
    Hou, Yanhui
    Kang, Sukbong
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2012, 26 (32):
  • [5] Microstructural evolution of 2026 aluminum alloy during hot compression and subsequent heat treatment
    Zhang Hui
    Chen Rong
    Huang Xu-dong
    Chen Jiang-hua
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2011, 21 (05) : 955 - 961
  • [6] Hot deformation behavior and microstructural evolution of titanium-aluminum based alloy during hot compression
    Duan, Z. X.
    Chen, H.
    Shen, Y. X.
    Liu, L. P.
    Feng, X. R.
    Song, X. L.
    Zou, H. H.
    Han, Y.
    Ran, X.
    Chens, H.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2024, 55 (10) : 1395 - 1405
  • [7] Effect of aluminum on microstructural evolution during hot deformation of TX32 magnesium alloy
    C. Dharmendra
    K. P. Rao
    F. Zhao
    Y. V. R. K. Prasad
    N. Hort
    K. U. Kainer
    Journal of Materials Science, 2014, 49 : 5885 - 5898
  • [8] Effect of aluminum on microstructural evolution during hot deformation of TX32 magnesium alloy
    Dharmendra, C.
    Rao, K. P.
    Zhao, F.
    Prasad, Y. V. R. K.
    Hort, N.
    Kainer, K. U.
    JOURNAL OF MATERIALS SCIENCE, 2014, 49 (17) : 5885 - 5898
  • [9] Microstructural Evolution and Dynamic Recrystallization Behavior of β-γ TiAl-based Alloy during Hot Compression
    Jiang, Hai Tao
    Zeng, Shang Wu
    Tian, Shi Wei
    Wu, Bo
    Zhao, Ai Min
    Xia, Zhen Hai
    ADVANCED ENGINEERING MATERIALS, 2017, 19 (02)
  • [10] Flow behavior and microstructural evolution during hot compression of TA15 titanium alloy
    School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China
    Trans Nonferrous Met Soc China, 2006, SUPPL. 3 (2066-2071):
12345