EURAMET project No. 1046 Inter-comparison of water flow standards using electromagnetic flowmeters Final report

被引：0

作者：

Gersl, Jan

Lojek, Libor

机构：

来源：

METROLOGIA | 2013年 / 50卷

关键词：

D O I：

暂无

中图分类号：

TH7 [仪器、仪表];

学科分类号：

0804 ; 080401 ; 081102 ;

摘要：

The Euramet comparison No. 1046 is a supplementary comparison of European national water flow laboratories. The comparison started in May 2008 and the measurements were finished in June 2009. Eleven laboratories took part in the comparison - namely: Austria (BEV), Bosnia and Herzegovina (IMBH), Czech Republic (CMI - pilot laboratory), France (CETIAT), Greece (EIM), Hungary (MKEH), Lithuania (VMT/LEI), Republic of Macedonia (BoM), Norway (Justervesenet), Slovakia (SMU) and Switzerland (METAS). Two electromagnetic flow-meters were used as transfer standards. Laboratories results were compared in a range of flow-rates between 1 m(3)/h and 10 m(3)/h with water at a temperature near to 20 degrees C. The data were evaluated according to standard methods.

引用

页数：59

共 10 条

[1] EURAMET Project no. 1157 Inter-comparison of a 1000 L proving tank
Batista, Elsa
Smits, Erik
METROLOGIA, 2013, 50
[2] EURAMET.PR-S3 Final Report Bilateral Inter-comparison of Chromatic Dispersion Reference Fibres
Morel, Jacques
METROLOGIA, 2013, 50
[3] Key Comparison EURAMET.EM-K5.1 EURAMET Project No. 687 Comparison of 50/60 Hz Power Final Report
Cayci, Huseyin
METROLOGIA, 2011, 48
[4] Final Report on EURAMET key comparison (EURAMETMM-K2.5) of 10 kg mass standards in stainless steel (Project code: EURAMET 1222)
Vmossy, Csilla
Bulku, Defrim
Borys, Michael
Alisic, Sejla
Boskovic, Tamara
Zelenka, Zoltan
METROLOGIA, 2015, 52
[5] Supplementary Comparison EURAMET.EM-S19 EURAMET Project No. 688 Bilateral Comparison of Measurements of Current Transformers (CTs) Between BIM and UME Final Report
Cayci, Hueseyin
METROLOGIA, 2011, 48
[6] Final Report Final Report on EURAMET key comparison (EURAMETMM-K4.2 and EURAMETMM-K2.2) of 1 kg and submultiples of the kilogram standards in stainless steel ( project code: EURAMET 1120)
不详
METROLOGIA, 2012, 49
[7] Final Report (Draft B) on EUROMET Project No. 446 - International comparison of magnetic flux density by means of field coil transfer standards
Weyand, K
Simon, E
Henderson, L
Bartholomew, J
Teunisse, GM
Blanc, I
Crotti, G
Kupec, J
Jeglic, A
Gersak, G
Humar, J
Puranen, LO
METROLOGIA, 2001, 38 (02) : 187 - 191
[8] Final report on supplementary comparison of national standards for liquid flow COOMETMFF-S2 (COOMET Project 406/UA/07)
Frahm, E.
Mickan, B.
Gulyuk, V.
Reut, G.
Zigmantas, G.
Benkova, M.
Kayumov, M.
METROLOGIA, 2020, 57 (1A)
[9] COOMET Project No. 626/BY/13 TECHNICAL REPORT OF SUPPLEMENTARY COMPARISON ⟪The comparison of national standards of the sound pressure unit in air through calibration of working standard microphones⟫ COOMET.AUV.A-S2 Final Report
不详
METROLOGIA, 2018, 55
[10] FINAL REPORT COOMET project no. 571/GE/12 COOMET.EM-S17 supplementary comparison on 10 0 and 100 kΩ Resistance standards Manana Gelovani (GEOSTM, pilot) Bernd Schumacher (PTB) May 2013
Gelovani, Manana
Schumacher, Bernd
METROLOGIA, 2014, 51

← 1 →