Design optimization of metal inert gas welding parameters for recuperating an ultimate tensile strength of AISI SS304 using L9 Taguchi orthogonal array

被引：0
|
作者：
Sharma, S. [1 ]
Singh, G. [2 ]
Jayarambabu, N. [3 ]
Sahni, G. [4 ]
机构：
[1] CSIR Cent Leather Res Inst, Reg Ctr Extens & Dev, Leather Complex, Jalandhar, Punjab, India
[2] Chandigarh Univ, Dept Mech Engn, Mohali, Punjab, India
[3] JNTUH, IST, Ctr Nanosci & Technol, Hyderabad, Telangana, India
[4] HOD & DGM Design Drawing & Dev Leader Valves Ltd, Jalandhar, Punjab, India
来源：
AUTOMATIC CONTROL, MECHATRONICS AND INDUSTRIAL ENGINEERING | 2019年
关键词：
AISI; 304; MIG; Ultimate tensile strength; Taguchi method & ANOVA;
D O I：
暂无
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
Metal Inert Gas (MIG) welding is one of the most broadly used welding processes in mass production, as well as in small scale industries. The main reason for this is that MIG welding can weld both ferrous and non-ferrous metals. The aim of the present study is to experimentally investigate the ultimate tensile strength during the MIG welding of AISI 304. The input parameters used for the experimental work were wire speed, gas flow rate and welding time. Mean effect plot and S/N ratio graphs have been used to optimize the welding parameters of MIG on AISI 304 stainless steel using the Taguchi method and ANOVA. It has been observed that wire speed has the largest effect on the tensile strength of AISI 304 steel MIG weldments. The optimum welding conditions for greater strength were wire speed (m/min), gas flow rate (liters/min) and welding time (sec).
引用
收藏
页码：219 / 225
页数：7
相关论文
共 25 条
  • [1] PYROLYSIS OPTIMIZATION OF AGRICULTURAL WASTE USING TAGUCHI L9 ORTHOGONAL ARRAY DESIGN
    Canales Flores, Roberto Antonio
    Prieto Garcia, Francisco
    Otazo Sanchez, Elena Maria
    Bolarin Miro, Ana Maria
    Acevedo Sandoval, Otilio Arturo
    BULGARIAN JOURNAL OF AGRICULTURAL SCIENCE, 2018, 24 (02): : 263 - 273
  • [2] Optimization of tig welding parameters to enhance the tensile strength of AISI 304 L stainless steel joints using taguchi methodology
    Ghosh, Nabendu
    Roy, Angshuman
    INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2025, 19 (01): : 509 - 522
  • [3] Preparation and optimization of various parameters of enteric coated pellets using the Taguchi L9 orthogonal array design and their characterization
    Shravani, D.
    Lakshmi, P. K.
    Balasubramaniam, J.
    ACTA PHARMACEUTICA SINICA B, 2011, 1 (01) : 56 - 63
  • [4] Aerodynamic Analysis of Low Speed Wing Design using Taguchi L9 Orthogonal Array
    Witcher, Kenneth
    McAndrew, Ian
    Vishnevskaya, Elena
    2017 ASIA CONFERENCE ON MECHANICAL AND AEROSPACE ENGINEERING (ACMAE 2017), 2018, 151
  • [5] Optimization of Argon Gas Metal Arc Welding Process Parameters with Regard to Tensile Strength for AISI 310 Stainless Steel Using Taguchi Technique
    Shete, Hanmant Virbhadra
    Gite, Sanket Dattatraya
    INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH IN AFRICA, 2022, 58 : 1 - 10
  • [6] Optimization of Process Parameters during Friction Stir Welding of dissimilar Aluminium Alloys (AA 5083 & AA 6061) using Taguchi L9 Orthogonal Array
    Babu, S. Ramesh
    Karthik, P.
    Karthik, S.
    Kumar, S. Arun
    Morris, Joel
    DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 : 630 - 635
  • [7] Optimization of process parameters of metal inert gas welding with preheating on AISI 1018 mild steel using grey based Taguchi method
    Kumar, Sudhir
    Singh, Rajender
    MEASUREMENT, 2019, 148
  • [8] Optimization Studies on Catalytic Pyrolysis of Empty Fruit Bunch (EFB) Using L9 Taguchi Orthogonal Array
    Doraiselvan, Kirenraj
    Yusup, Suzana
    Wai, Cheah K.
    Muda, Nur S.
    PRES15: PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION, 2015, 45 : 1639 - 1644
  • [9] Parameters optimization of tungsten inert gas welding process on 304L stainless steel using grey based Taguchi method
    Linger, Muluken Alemu
    Bogale, Teshome Mulatie
    ENGINEERING RESEARCH EXPRESS, 2023, 5 (01):
  • [10] Experimental investigation and optimization of turning process of EN8 steel using Taguchi L9 orthogonal array
    Gurugubelli, Sasidhar
    Chekuri, Rama Bhadri Raju
    Penmetsa, Ravi Varma
    MATERIALS TODAY-PROCEEDINGS, 2022, 58 : 233 - 237
123