Effect of Deformation and Annealing Treatment on Microstructure Evolution of Fe47Mn3oCo10Cr10B3 Dual-Phase High-Entropy Alloy

被引:4
|
作者
Liu Yi [1 ]
Tu Jian [1 ,2 ]
Jian Weihua [1 ]
Yin Ruisen [3 ]
Tan Li [1 ]
Huang Can [1 ]
Zhou Zhiming [1 ,2 ]
机构
[1] Chongqing Univ Technol, Coll Mat Sci & Engn, Chongqing 400054, Peoples R China
[2] Chongqing Univ Technol, Chongqing Municipal Key Lab Inst Higher Educ Moul, Chongqing 400054, Peoples R China
[3] Chongqing Univ, Coll Aerosp Engn, Chongqing 400044, Peoples R China
基金
中国博士后科学基金;
关键词
high entropy alloy; microstructure; transformation-induced plasticity; variant; TRANSFORMATION; STABILITY; STRENGTH; DESIGN;
D O I
10.11900/0412.1961.2020.00154
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
In recent years, non-equiatomic high-entropy alloy (HEA) has been proposed to explore the flexibility of its design rule, avoiding the strength-ductility tradeoff. For further progress, non-equiatomic HEAs doped with interstitial atoms are developed. Boron, an effective dopant in metallurgy, has been used due to the beneficial compositional effects on the interfaces of metallic materials. In this work, the effects of deformation and annealing treatments on the microstructural evolution of Fe47Mn30Co10Cr10B3 dual-phase HEAs were investigated via electron channeling contrast imaging (ECCI) and EBSD. The results show that there are three stages in the deformation mechanism with an increase in the deformation degree, which include the dominant dislocation slip in the fcc phase, joint deformation of the transformation-induced plasticity and dislocation slip, and activation of dislocation slip in the hcp phase. With an increase in the annealing holding time, the partial recrystallization transformed to complete recrystallization. Further, particles located in the grain boundary can effectively restrain grain growth, and in turn, exhibit the bimodal grain size. The amount of annealing twinning variants is influenced by the fcc grain orientation: grains with < 101 > orientation are prone to forming multiple twinning variants, whereas, grains with < 111 > and < 100 > orientations are prone to forming a single twinning variant. The amount of annealing twinning variants also affected the morphological characteristics of the single hcp variant; the absence of annealing twinning variant is ascribed to the formation of blocky hcp phases and the single annealing twinning variant is attributed to the formation of laminate hcp phase. Moreover, the number of hcp variants was affected by the fcc grain sizes; large-sized grains facilitated the formation of multiple hcp variants, whereas, small-sized grains facilitated the formation of the single hcp variant.
引用
收藏
页码:1569 / 1580
页数:12
相关论文
共 27 条
  • [1] Phase Engineering of High-Entropy Alloys
    Chang, Xuejiao
    Zeng, Mengqi
    Liu, Keli
    Fu, Lei
    [J]. ADVANCED MATERIALS, 2020, 32 (14)
  • [2] STACKING-FAULTS AND FCC (GAMMA)-]HCP (EPSILON) TRANSFORMATION IN 18-8-TYPE STAINLESS-STEEL
    FUJITA, H
    UEDA, S
    [J]. ACTA METALLURGICA, 1972, 20 (05): : 759 - +
  • [3] Dislocation-induced breakthrough of strength and ductility trade-off in a non-equiatomic high-entropy alloy
    Guo, Wenqi
    Su, Jing
    Lu, Wenjun
    Liebscher, Christian H.
    Kirchlechner, Christoph
    Ikeda, Yuji
    Koermann, Fritz
    Liu, Xuan
    Xue, Yunfei
    Dehm, Gerhard
    [J]. ACTA MATERIALIA, 2020, 185 : 45 - 54
  • [4] Hansen Niels., 2014, Physical Metallurgy, P1681, DOI DOI 10.1016/B978-0-444-53770-6.00017-4
  • [5] Joint contribution of transformation and twinning to the high strength-ductility combination of a FeMnCoCr high entropy alloy at cryogenic temperatures
    He, Z. F.
    Jia, N.
    Ma, D.
    Yan, H. L.
    Li, Z. M.
    Raabe, D.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 759 : 437 - 447
  • [6] Humphreys F. J., 2004, Recrystallization and Related Annealing Phenomena, P121, DOI [DOI 10.1016/B978-008044164-1/50009-8, DOI 10.1016/B978-0-08-044164-1.X5000-2]
  • [7] A unified theory of recovery, recrystallization and grain growth, based on the stability and growth of cellular microstructures .2. The effect of second-phase particles
    Humphreys, FJ
    [J]. ACTA MATERIALIA, 1997, 45 (12) : 5031 - 5039
  • [8] Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy
    Jo, Y. H.
    Jung, S.
    Choi, W. M.
    Sohn, S. S.
    Kim, H. S.
    Lee, B. J.
    Kim, N. J.
    Lee, S.
    [J]. NATURE COMMUNICATIONS, 2017, 8
  • [9] Snoek-type damping performance in strong and ductile high-entropy alloys
    Lei, Zhifeng
    Wu, Yuan
    He, Junyang
    Liu, Xiongjun
    Wang, Hui
    Jiang, Suihe
    Gu, Lin
    Zhang, Qinghua
    Gault, Baptiste
    Raabe, Dierk
    Lu, Zhaoping
    [J]. SCIENCE ADVANCES, 2020, 6 (25):
  • [10] Strong and Ductile Non-equiatomic High-Entropy Alloys: Design, Processing, Microstructure, and Mechanical Properties
    Li, Zhiming
    Raabe, Dierk
    [J]. JOM, 2017, 69 (11) : 2099 - 2106