Microstructure and Friction-Wear Resistance of In-Situ TiB2/ZA27 Composites

被引：0

作者：

Tang Yunwu ^{[1
]}

Chen Fei ^{[1
]}

Cao Zhiqiang ^{[1
]}

Li Tingju ^{[1
]}

机构：

[1] Dalian Univ Technol, Dalian 116023, Peoples R China

来源：

RARE METAL MATERIALS AND ENGINEERING | 2014年 / 43卷 / 01期

关键词：

in-situ; TiB2/ZA27; composites; TiB2; particles; wear resistance; MATRIX COMPOSITES;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In-situ TiB2/ZA27 composites were produced in two steps. Firstly, the reaction of creating TiB2 was processed in melted Al. Secondly, as a master alloy, TiB2/Al material was used to fabricate TiB2/ZA27 composites. It is found that the sizes of the TiB2 particles are small and their shapes are equiaxed. The microstructure and wear resistance of the composite materials were tested by means of metallurgical microscope, XRD, SEM, EDS and friction-wear test. The test results show that the TiB2 particles are distributed in ZA27 matrix uniformly and their average diameter is less than 3 mu m. TiB2 particles have a significant refining effect on the matrix, whilst the friction-wear resistance of the composites are enhanced obviously with the increase of TiB2 particles.

引用

页码：194 / 198

页数：5

共 11 条

[1] ALTORFER KJ, 1982, MET PROG, V122, P29
[2] Investigation of the precipitation kinetics in an Al6061/TiB2 metal matrix composite
Bartels, C
Raabe, D
Gottstein, G
Huber, U
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1997, 237 (01): : 12 - 23
[3] [崔峰 Cui Feng], 2004, [复合材料学报, Acta Materiae Compositae Sinica], V21, P87
[4] Davies P, 1993, UK Patent, Patent No. [93/05189, 9305189]
[5] Dometakis C, 1995, DESIGN FUNDAMENTALS, P57
[6] PARTICULATE REINFORCED METAL MATRIX COMPOSITES - A REVIEW
IBRAHIM, IA
MOHAMED, FA
LAVERNIA, EJ
[J]. JOURNAL OF MATERIALS SCIENCE, 1991, 26 (05) : 1137 - 1156
[7] In situ ceramic particle-reinforced aluminum matrix composites fabricated by reaction pressing in the TiO2 (Ti)-Al-B (B2O3) systems
Ma, ZY
Tjong, SC
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1997, 28 (09): : 1931 - 1942
[8] Material properties of titanium diboride
Munro, RG
[J]. JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, 2000, 105 (05) : 709 - 720
[9] Qijie Zhai, 1994, MAT MECH ENG, V18, P1
[10] Rongjiu Li, 2002, CERAMIC METAL COMPOS, P20

← 1 2 →