Corrosion behaviour of Ti-6Al-4V alloy in concentrated hydrochloric and sulphuric acids

被引：54
|
作者：
Mogoda, AS [1 ]
Ahmad, YH [1 ]
Badawy, WA [1 ]
机构：
[1] Cairo Univ, Fac Sci, Dept Chem, Giza, Egypt
来源：
JOURNAL OF APPLIED ELECTROCHEMISTRY | 2004年 / 34卷 / 09期
关键词：
corrosion; hydrochloric acid; sulphuric acid; titanium; Ti-6Al-4V alloy;
D O I：
10.1023/B:JACH.0000040447.26482.bd
中图分类号：
O646 [电化学、电解、磁化学];
学科分类号：
081704 ;
摘要：
Open-circuit potential, polarization and electrochemical impedance spectroscopy (EIS) measurements were used to investigate the corrosion behaviour of Ti-6Al-4V alloy in H2SO4 and HCl solutions. The corrosion rate of the alloy was found to increase with increasing acid concentration. The corrosion behaviour of the alloy was compared to that of pure titanium in both acids. The results showed that the alloy is more corrosion resistant than pure titanium in the investigated solutions. The apparent activation energies of the corrosion process for titanium are lower than those of the alloy in the same solutions, which reflects the higher corrosion resistance of the alloy.
引用
收藏
页码：873 / 878
页数：6
相关论文
共 50 条
  • [1] Corrosion Behaviour of Ti–6Al–4V Alloy in Concentrated Hydrochloric and Sulphuric Acids
    A.S. Mogoda
    Y.H. Ahmad
    W.A. Badawy
    Journal of Applied Electrochemistry, 2004, 34 : 873 - 878
  • [2] Corrosion inhibition of Ti-6Al-4V alloy in methanolic sulphuric and hydrochloric acid solutions using Bradoral
    Mogoda, A.S.
    Ahmad, Y.H.
    Badawy, W.A.
    Corrosion Prevention and Control, 2005, 52 (01): : 23 - 32
  • [3] Corrosion behavior of Ti-6Al-4V alloy weldment in hydrochloric acid
    Atapour, M.
    Fathi, M. H.
    Shamanian, M.
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2012, 63 (02): : 134 - 139
  • [4] STRUCTURE AND PITTING CORROSION OF Ti-6Al-4V ALLOY AND Ti-6Al-4V WELDS
    Ferdinandov, Nikolay Vasilev
    Gospodinov, Danail Dimitrov
    Ilieva, Mariana Dimitrova
    Radev, Rossen Hristov
    PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND SYSTEMS, 2018, : 325 - 330
  • [5] An investigation on dissolution and passivation behaviour of Ti-6Al-4V in sulphuric acid
    Singh, VB
    Hosseini, SMA
    INDIAN JOURNAL OF CHEMICAL TECHNOLOGY, 1998, 5 (04) : 241 - 245
  • [6] Corrosion resistance properties of plasma nitrided Ti-6Al-4V alloy in hydrochloric acid solutions
    Galvanetto, E
    Galliano, FP
    Fossati, A
    Borgioli, F
    CORROSION SCIENCE, 2002, 44 (07) : 1593 - 1606
  • [7] THE EFFECT OF SHOT PEENING ON THE CORROSION BEHAVIOUR OF Ti-6Al-4V ALLOY MADE BY DMLS
    Zebrowski, R.
    Walczak, M.
    ADVANCES IN MATERIALS SCIENCE, 2018, 18 (03): : 43 - +
  • [8] Corrosion Behaviour of Ti-6Al-4V Alloy as Dental Implant Containing Fluoride Ions
    Xu, Yingying
    Wang, Jing
    Zhang, Xingle
    Wang, Peng
    Shi, Jinghua
    Huo, Feng
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2017, 12 (11): : 10308 - 10316
  • [9] High-temperature corrosion of Ti and Ti-6Al-4V alloy
    Du, HL
    Datta, PK
    Lewis, DB
    BurnellGray, JS
    OXIDATION OF METALS, 1996, 45 (5-6): : 507 - 527
  • [10] Corrosion fatigue behaviour of Ti-6Al-4V in methanol environment
    Baragetti, Sergio
    SURFACE AND INTERFACE ANALYSIS, 2013, 45 (10) : 1654 - 1658
12345