THE ANALYSIS OF "HOT" DRAWING PROCESS OF TRIP STEEL WIRES AT DIFFERENT INITIAL TEMPERATURES

被引：3

作者：

Wiewiorowska, S. ^{[1
]}

Muskalski, Z. ^{[1
]}

Sieminski, M. ^{[2
]}

机构：

[1] Czestochowa Tech Univ, Fac Prod Engn & Mat Technol, 19 Armii Krajowej Str, PL-42200 Czestochowa, Poland

[2] Metalurgia SA, Swietej Rozalii 10-12, PL-97500 Radomsko, Poland

来源：

ARCHIVES OF METALLURGY AND MATERIALS | 2016年 / 61卷 / 04期

关键词：

TRIP steel; hot" drawing process; wires; MARTENSITIC-TRANSFORMATION; BAINITIC STEEL;

D O I：

10.1515/amm-2016-0321

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

In the work the results of preliminary research of the "hot" drawing process of TRIP steel wires at different initial temperatures has been shown. The study is expected to find whether the "hot" drawing process, and so the increase in the temperature of the material being drawn, will block the transformation of retained austenite into martensite and, as a consequence, influence the properties of drawn wire.

引用

页码：1991 / 1994

页数：4

共 50 条

[1] ANALYSIS THE INFLUENCE OF DRAWING PROCESS PARAMETERS ON THE AMOUNT OF RETAINED AUSTENITE IN TRIP STEEL WIRES
Wiewiorowska, S.
Muskalski, Z.
METALURGIJA, 2013, 52 (01): : 32 - 34
[2] ANALYSIS OF THE INFLUENCE OF DRAWING PROCESS PARAMETERS ON THE MECHANICAL PROPERTIES OF TRIP-STRUCTURE STEEL WIRES
Wiewiorowska, S.
ARCHIVES OF METALLURGY AND MATERIALS, 2013, 58 (02) : 573 - 578
[3] The influence the temperature of drawing process on the transformation retained austenite into martensite for TRIP steel wires
Wiewiórowska, Sylwia
Muskalski, Zbigniew
Siemiński, Marek
Solid State Phenomena, 2015, 220-221 : 661 - 666
[4] The Influence of the Drawing Process on the Mechanical Properties of TRIP Steel Wires with 0.4% C Content
Kucharska, Monika
Wiewiorowska, Sylwia
Michalczyk, Jacek
Gontarz, Andrzej
MATERIALS, 2020, 13 (24) : 1 - 19
[5] The influence of drawing speed on fatigue strength TRIP steel wires
Suliga, M.
Muskalski, Z.
Wiewiorowska, S.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2009, 9 (03) : 97 - 107
[6] Numerical and experimental analysis of the process of drawing wires of TRIP steel with a carbon content of 0.43% C, with single cross-section reductions
Muskalski, Z.
Wiewirowska, S.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2015, 46 (03) : 279 - 284
[7] ANALYSIS OF THE HEATING OF STEEL WIRES DURING HIGH SPEED MULTIPASS DRAWING PROCESS
Suliga, M.
ARCHIVES OF METALLURGY AND MATERIALS, 2014, 59 (04) : 1475 - 1480
[8] High speed multi-stage drawing process of hot-dip galvanised steel wires
Maciej Suliga
Radosław Wartacz
Jacek Michalczyk
The International Journal of Advanced Manufacturing Technology, 2022, 120 : 7639 - 7655
[9] High speed multi-stage drawing process of hot-dip galvanised steel wires
Suliga, Maciej
Wartacz, Radoslaw
Michalczyk, Jacek
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 120 (11-12): : 7639 - 7655
[10] THE EFFECT OF DRAWING SPEED ON FORCE PARAMETERS IN MULTIPASS DRAWING PROCESS OF STEEL WIRES
Suliga, Maciej
METAL 2016: 25TH ANNIVERSARY INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2016, : 494 - 500

← 1 2 3 4 5 →