An assessment of the crack tip opening displacement criterion for predicting creep crack growth

被引：7

作者：

Xia, L

Hyde, TH

Becker, AA

机构：

[1] Department of Mechanical Engineering, University of Nottingham, Nottingham NG7 2RD, University Park

来源：

INTERNATIONAL JOURNAL OF FRACTURE | 1996年 / 77卷 / 01期

关键词：

D O I：

10.1007/BF00035369

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

From a set of finite element (FE) simulations of creep crack growth in compact tension specimens, the critical value of the crack tip opening displacement, CTOD, for creep crack growth has been generated for a Ni-base superalloy (Waspaloy) at 700 degrees C. It was found that the critical value is independent of the initial crack length, amount of previous creep crack growth and the load level. Hence, the CTOD seems likely to be a viable criterion for use in creep crack growth rate analysis. Good agreement was also obtained between the experimental test results and FE predictions of the creep crack growth with time and between the crack growth rate, da/dt, versus the C* parameter based on load-line displacement rate.

引用

页码：29 / 40

页数：12

共 50 条

[1] Description of the kinetics of growth of a fatigue crack on the basis of the criterion of current crack tip opening displacement
Krasovskii A.Ya.
Pinyak I.S.
Strength of Materials, 1998, 30 (4) : 398 - 403
[2] Current value of the fatigue crack tip opening displacement as an experimentally substantiated criterion of crack growth
Pinyak I.S.
Strength of Materials, 1998, 30 (1) : 17 - 24
[3] The Paris law for fatigue crack growth in terms of the crack tip opening displacement
McClintock, FA
HIGH CYCLE FATIGUE OF STRUCTURAL MATERIALS, 1997, : 3 - 24
[4] The mechanical crack tip opening displacement fracture criterion in piezoelectric ceramics
Xue, Cun
Yong, Huadong
Zhou, Youhe
ENGINEERING FRACTURE MECHANICS, 2012, 96 : 606 - 614
[5] Description of the fatigue crack growth kinetics using the criterion for its current tip opening displacement
Inst Problem Prochnosti AN Ukrainy, Kiev, Ukraine
Xiaoxing Weixing Jisuanji Xitong, 11 (60-67):
[6] A MODEL FOR RELATING CRACK OPENING DISPLACEMENT AND CRACK TIP STRAIN
DAVIDSON, DL
SCRIPTA METALLURGICA, 1982, 16 (03): : 281 - 283
[7] A study on the relationship between fatigue crack growth behavior and cyclic crack tip opening displacement
Chang, Hyeon
Choi, Hyeonki
EXPERIMENTAL MECHANICS IN NANO AND BIOTECHNOLOGY, PTS 1 AND 2, 2006, 326-328 : 1051 - 1054
[8] On the cyclic crack-tip opening displacement
McEvily, A. J.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2009, 32 (03) : 284 - 285
[9] A new method of crack-tip opening displacement determined based on maximum crack opening displacement
Huang Yi
Chen Jingjie
Liu Gang
Yang Hongbiao
ENGINEERING FRACTURE MECHANICS, 2011, 78 (07) : 1441 - 1451
[10] Crack tip opening displacement and angle for a growing crack in carbon steel
Lam, Poh-Sang
Kim, Yil
Chao, Yuh J.
Proceedings of the ASME Pressure Vessels and Piping Conference 2005, Vol 6, 2005, 6 : 197 - 204

← 1 2 3 4 5 →