Effect of annealing temperature on martensitic transformation of Ti49.2Ni50.8 alloy processed by equal channel angular pressing

被引:20
|
作者
Zhang, Dian-tao [1 ,2 ]
Guo, Bao [1 ,2 ]
Tong, Yun-xiang [1 ,2 ]
Tian, Bing [1 ,2 ]
Li, Li [1 ,2 ]
Zheng, Yu-feng [2 ,3 ]
Gunderov, Dmitry-V [4 ]
Valiev, Ruslan-Z [4 ]
机构
[1] Harbin Engn Univ, Key Lab Superlight Mat & Surface Technol, Minist Educ, Harbin 150001, Peoples R China
[2] Harbin Engn Univ, Ctr Biomed Mat & Engn, Coll Mat Sci & Chem Engn, Harbin 150001, Peoples R China
[3] Peking Univ, Dept Mat Sci & Engn, Coll Engn, Beijing 100871, Peoples R China
[4] Ufa State Aviat Tech Univ, Inst Phys Adv Mat, Ufa 450000, Russia
基金
中国国家自然科学基金;
关键词
TiNi alloy; equal channel angular pressing; martensitic transformation; annealing temperature; SHAPE-MEMORY ALLOYS; R-PHASE-TRANSFORMATION; MECHANICAL-PROPERTIES; CYCLIC REVERSIBILITY; BEHAVIOR; TINI; DEFORMATION; EXTRUSION; PRESSURE;
D O I
10.1016/S1003-6326(16)64133-X
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The effect of annealing temperature on the martensitic transformation of a Ti49.2Ni50.8 alloy processed by equal channel angular pressing (ECAP) was investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM) and differential scanning calorimetry (DSC). The as-ECAP processed and subsequently annealed Ti49.2Ni50.8 alloys consist of B2 parent phase, Ti4Ni2O phase and B19' martensite at room temperature. Upon cooling, all samples show B2 -> R -> B19' two-stage transformation. Upon heating, when the annealing temperature is less than 400 degrees C, the samples show B19'-> R -> B2 two-stage transformation; when the annealing temperature is higher than 500 degrees C, the samples show B19'-> B2 single-stage transformation. The B2-R transformation is characterized by wide interval due to the dislocations introduced during ECAP.
引用
收藏
页码:448 / 455
页数:8
相关论文
共 50 条
  • [1] Simulation and Experimental Investigation for the Homogeneity of Ti49.2Ni50.8 Alloy Processed by Equal Channel Angular Pressing
    Zhang, Diantao
    Osman, Mohamed
    Li, Li
    Zheng, Yufeng
    Tong, Yunxiang
    METALS, 2016, 6 (03):
  • [2] Multiple-stage transformation behavior of Ti49.2Ni50.8 alloy with different initial microstructure processed by equal channel angular pressing
    Tong, Y. X.
    Hu, K. P.
    Chen, F.
    Tian, B.
    Li, L.
    Zheng, Y. F.
    INTERMETALLICS, 2017, 85 : 163 - 169
  • [3] Evolution of Ti3Ni4 precipitates in Ti49.2Ni50.8 alloy during equal channel angular pressing
    Ren, Jia-rui
    Shuitcev, Alexander, V
    Sun, Bin
    Chen, Feng
    Li, Li
    Tong, Yun-xiang
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2021, 31 (04) : 980 - 987
  • [4] Superelasticity and its stability of an ultrafine-grained Ti49.2Ni50.8 shape memory alloy processed by equal channel angular pressing
    Tong, Y. X.
    Chen, F.
    Guo, B.
    Tian, B.
    Li, L.
    Zheng, Y. F.
    Gunderov, Dmitry V.
    Valiev, Ruslan Z.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 587 : 61 - 64
  • [5] THE EFFECT OF PRECIPITATION HARDENING ON THE MS TEMPERATURE IN A TI49.2NI50.8 ALLOY
    WU, SK
    LIN, HC
    SCRIPTA METALLURGICA ET MATERIALIA, 1991, 25 (07): : 1529 - 1532
  • [6] Effect of Warm Rolling on the Martensite Transformation Temperatures, Shape Memory Effect, and Superelasticity in Ti49.2Ni50.8 Alloy
    Lotkov, Aleksander
    Zhapova, Dorzhima
    Grishkov, Victor
    Cherniavsky, Alexander
    Timkin, Victor
    ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2016, 2016, 1783
  • [7] Influence of deformation during warm rolling on martensitic transformation temperatures and the value of superelasticity and shape memory effects in Ti49.2Ni50.8 (at %) alloy
    Lotkov A.I.
    Koval Y.N.
    Grishkov V.N.
    Zhapova D.Y.
    Timkin V.N.
    Firstov G.S.
    Inorganic Materials: Applied Research, 2015, 6 (5) : 498 - 505
  • [8] Elastic softening of Ti49.2Ni50.8 single crystal prior to B2-B19' martensitic transformation
    Miura, N
    Zhang, J
    Ren, X
    Otsuka, K
    Suzuki, T
    Tanaka, K
    Chumlyakov, YI
    Asai, M
    JAPAN INSTITUTE OF METALS, PROCEEDINGS, VOL 12, (JIMIC-3), PTS 1 AND 2: SOLID - SOLID PHASE TRANSFORMATIONS, 1999, : 827 - 830
  • [9] Effect of Warm Multipass Caliber Rolling on Superelasticity and Shape Memory of Ti49.2Ni50.8 at.% Alloy
    Lotkov, Aleksandr I.
    Grishkov, Victor N.
    Zhapova, Dorzhima Yu.
    Timkin, Victor N.
    INTERNATIONAL CONFERENCE ON PHYSICAL MESOMECHANICS OF MULTILEVEL SYSTEMS 2014, 2014, 1623 : 359 - 362
  • [10] Nanocrystalline Ti49.2Ni50.8 shape memory alloy as orthopaedic implant material with better performance
    H.F.Li
    F.L.Nie
    Y.F.Zheng
    Y.Cheng
    S.C.Wei
    R.Z.Valiev
    JournalofMaterialsScience&Technology, 2019, 35 (10) : 2156 - 2162