DKPCA based Fault detection of cold bending forming process in torque tube manufacture

Torque tube is widely used on the offshore platform, and its quality plays an important role on the security of offshore platform. The cold bending forming process for torque tube production is nonlinear and dynamic seriously, with the fault types varied and complex, so the traditional PCA cannot get a good effect in the fault detection of cold bending forming. In this paper, a fault detection method based on dynamic kernel principal component analysis (DKPCA) algorithm is introduced to detect the faults of the cold bending forming. Eleven process variables were sampled from the actual manufacture process and used for fault diagnosis. PCA and DKPCA are used to carry out fault detection on the cold bending forming process, and the results show that the effect of DKPCA for fault detection is better than that of PCA. DKPCA can improve the detection effect greatly due to its advantage in nonlinear and dynamic characteristics, which can be applied widely in actual process..