Development of ultrafine grained Al-Mg-Si alloy with enhanced strength and ductility

被引:49
|
作者
Panigrahi, Sushanta Kumar [1 ]
Jayaganthan, R. [1 ]
机构
[1] Indian Inst Technol Roorkee, Dept Met & Mat Engn, Roorkee 247667, Uttar Pradesh, India
关键词
Al-Mg-Si alloy; Cryorolling; Ultrafine grained microstructure; Tensile properties; MECHANICAL-PROPERTIES; MICROSTRUCTURE; ECAP; DEFORMATION; ALUMINUM; BEHAVIOR;
D O I
10.1016/j.jallcom.2008.02.028
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
The microstructure and mechanical properties of a precipitation hardenable Al-Mg-Si alloy subjected to cryorolling (CR), short annealing and ageing treatments are reported in this present work. The pre-cryorolled solid solution treatment combined with post-CR short annealing (155 degrees C for 5 min) and then ageing treatment (125 degrees C for 12 h) has been found to be the optimum processing condition to obtain the ultrafine grained microstructure with substantial improvement of tensile strength (286 MPa) and good tensile ductility (14%) in the Al-Mg-Si alloy. The significant improvement of the mechanical properties of the cryorolled and peak aged 6063 Al alloys have been observed as compared to its bulk alloys in the peak-aged condition (T6). (C) 2008 Elsevier B.V. All rights reserved.
引用
收藏
页码:285 / 288
页数:4
相关论文
共 50 条
  • [1] Enhanced ductility and deformation mechanisms of ultrafine-grained Al-Mg-Si alloy in sheet form at warm temperatures
    Kim, W. J.
    Yoo, S. J.
    SCRIPTA MATERIALIA, 2009, 61 (02) : 125 - 128
  • [2] Enhanced strength and electrical conductivity of ultrafine-grained Al-Mg-Si alloy processed by hydrostatic extrusion
    Majchrowicz, Kamil
    Pakiela, Zbigniew
    Chrominski, Witold
    Kulczyk, Mariusz
    MATERIALS CHARACTERIZATION, 2018, 135 : 104 - 114
  • [3] Precipitation phenomena in ultrafine grained Al-Mg-Si alloy with heterogeneous microstructure
    Chrominski, Witold
    Lewandowska, Malgorzata
    ACTA MATERIALIA, 2016, 103 : 547 - 557
  • [4] The effect of ultrafine-grained states on superplastic behavior of Al-Mg-Si alloy
    Bobruk, Elena, V
    Safargalina, Zarema A.
    Golubev, Oleg, V
    Baykov, Danil
    Kazykhanov, Vil U.
    MATERIALS LETTERS, 2019, 255
  • [5] Enhancement in Strength and Ductility of Al-Mg-Si alloy by Cryorolling followed by Warm rolling
    Rao, P. Nageswara
    Kaurwar, Amritha
    Singh, Dharmendra
    Jayaganthan, R.
    INTERNATIONAL CONFERENCE ON MATERIALS FOR ADVANCED TECHNOLOGIES (ICMAT2013), SYMPOSIUM W - ADVANCED STRUCTURAL AND FUNCTIONAL MATERIALS FOR PROTECTION, 2014, 75 : 123 - 128
  • [6] Precipitation strengthening of ultrafine-grained Al-Mg-Si alloy processed by hydrostatic extrusion
    Chrominski, W.
    Kulczyk, M.
    Lewandowska, M.
    Kurzydlowski, K.J.
    Materials Science and Engineering: A, 2014, 609 : 80 - 87
  • [7] Precipitation strengthening of ultrafine-grained Al-Mg-Si alloy processed by hydrostatic extrusion
    Chrominski, W.
    Kulczyk, M.
    Lewandowska, M.
    Kurzydlowski, K. J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 609 : 80 - 87
  • [8] Corrosion characteristics of an ultrafine-grained Al-Mg-Si alloy (AA6082)
    Wielage, Bernhard
    Nickel, Daniela
    Lampke, Thomas
    Alisch, Gert
    Podlesak, Harry
    Darwich, Samer
    Hockauf, Matthias
    NANOMATERIALS BY SEVERE PLASTIC DEFORMATION IV, PTS 1 AND 2, 2008, 584-586 : 988 - 993
  • [9] Superior strength-ductility synergy in ultrafine-grained Al-5Mg alloy
    Mavlyutov, Aydar M.
    Kirilenko, Demid A.
    Levin, Aleksandr A.
    Murashkin, Maxim Yu.
    Sadykov, Dinislam I.
    Orlova, Tatiana S.
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2025, 34 : 2329 - 2343
  • [10] Effect of Post Cryorolling Treatments on Microstructural and Mechanical Behaviour of Ultrafine Grained Al-Mg-Si Alloy
    Rao, P. Nageswara
    Singh, Dharmendra
    Jayaganthan, R.
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2014, 30 (10) : 998 - 1005