Material Properties of Graphene/Aluminum Metal Matrix Composites Fabricated by Friction Stir Processing

被引：207
|
作者：
Jeon, Chi-Hoon [1 ]
Jeong, Yong-Ha [2 ]
Seo, Jeong-Jin [3 ]
Huynh Ngoc Tien [4 ]
Hong, Sung-Tae [2 ]
Yum, Young-Jin [2 ]
Hur, Seung-Hyun [4 ]
Lee, Kwang-Jin [5 ]
机构：
[1] SL Corp, Gyongsan, South Korea
[2] Univ Ulsan, Sch Mech Engn, Ulsan 680749, South Korea
[3] Hyundai Hysco Co, Ulsan, South Korea
[4] Univ Ulsan, Sch Chem Engn & Bioengn, Ulsan 680749, South Korea
[5] Korea Inst Ind Technol, Environm Mat & Components Ctr, Jeonju, South Korea
来源：
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING | 2014年 / 15卷 / 06期
关键词：
Metal matrix composites; Mechanical properties; Friction stir processing; SINGLE-WALLED CARBON; AL-ALLOY; GRAPHENE; SUPERPLASTICITY; MICROSTRUCTURE; BEHAVIOR; OXIDE;
D O I：
10.1007/s12541-014-0462-2
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Graphene/aluminum metal matrix composites (NIMC) with enhanced thermal conductivity are fabricated by friction stir processing (FSP). In fabrication of the MMC, graphene reinforcement is applied in the form of a graphene oxide (GO)/water colloid for safer and simpler processing. The result of Raman spectroscopy suggests that graphene reinforcements are successfully mixed into the aluminum matrix by FSP. The thermal conductivity of the graphene/aluminum WC is measured to increase by more than 15% in comparison with that of the aluminum matrix. FSP and graphene reinforcement both improve the ductility of the fabricated MMC.
引用
收藏
页码：1235 / 1239
页数：5
相关论文
共 50 条
  • [1] Material properties of graphene/aluminum metal matrix composites fabricated by friction stir processing
    Chi-Hoon Jeon
    Yong-Ha Jeong
    Jeong-Jin Seo
    Huynh Ngoc Tien
    Sung-Tae Hong
    Young-Jin Yum
    Seung-Hyun Hur
    Kwang-Jin Lee
    International Journal of Precision Engineering and Manufacturing, 2014, 15 : 1235 - 1239
  • [2] A review on microstructures and properties of graphene-reinforced aluminum matrix composites fabricated by friction stir processing
    Zhang, Huijie
    Zhang, Baoxin
    Gao, Qiuzhi
    Song, Jianling
    Han, Guoliang
    JOURNAL OF MANUFACTURING PROCESSES, 2021, 68 : 126 - 135
  • [3] Microstructure and Properties of Aluminum-Graphene-SiC Matrix Composites after Friction Stir Processing
    Wang, Chen
    Zhu, Xianyong
    Fan, Yuexiang
    Liu, Jiaan
    Xie, Liangwen
    Jiang, Cheng
    Xiao, Xiong
    Wu, Peng
    You, Xiangmi
    MATERIALS, 2024, 17 (05)
  • [4] New metal matrix composites with fullerene dispersion fabricated by friction stir processing
    Osaka Municipal Technical Research Institute, 1-6-50 Morinomiya, Jyotoku, Osaka-shi, Osaka 536-8553
    不详
    Keikinzoku J Jpn Inst Light Met, 2007, 11 (524-528):
  • [5] Tailoring Microstructure and Properties of Hierarchical Aluminum Metal Matrix Composites Through Friction Stir Processing
    Y. H. Sohn
    T. Patterson
    C. Hofmeister
    C. Kammerer
    W. Mohr
    M. van den Bergh
    M. Shaeffer
    J. Seaman
    K. Cho
    JOM, 2012, 64 : 234 - 238
  • [6] Tailoring Microstructure and Properties of Hierarchical Aluminum Metal Matrix Composites Through Friction Stir Processing
    Sohn, Y. H.
    Patterson, T.
    Hofmeister, C.
    Kammerer, C.
    Mohr, W.
    Van Den Bergh, M.
    Shaeffer, M.
    Seaman, J.
    Cho, K.
    JOM, 2012, 64 (02) : 234 - 238
  • [7] Materials Properties and Microstructure of Graphite/Aluminum Composites Fabricated by Friction Stir Processing
    Kim, JaeHwang
    Song, Ram
    Lee, KwangJin
    Science of Advanced Materials, 2016, 8 (11) : 2178 - 2182
  • [8] Microstructural, mechanical and wear characteristics of aluminum matrix composites fabricated by friction stir processing
    Maji, Pabitra
    Ghosh, Subrata Kumar
    Nath, Rahul Kanti
    Karmakar, Ranit
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2020, 42 (04)
  • [9] Microstructural, mechanical and wear characteristics of aluminum matrix composites fabricated by friction stir processing
    Pabitra Maji
    Subrata Kumar Ghosh
    Rahul Kanti Nath
    Ranit Karmakar
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2020, 42
  • [10] Wear and mechanical properties of surface hybrid metal matrix composites on Al-Si aluminum alloys fabricated by friction stir processing
    Akbari, Mostafa
    Shojaeefard, Mohammad Hasan
    Asadi, Parviz
    Khalkhali, Abolfazl
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2019, 233 (05) : 790 - 799
12345