The effect of alloying additions on vacancy behaviour in aluminium-copper alloys

被引：3
|
作者：
Kratzer, Terence
Gable, Brian M.
Nairn, Kate M.
Bastow, Timothy J.
Muddle, Barry C.
Hill, Anita J.
机构：
[1] CSIRO Mfg & Infrastruct Technol, Clayton, Vic 3169, Australia
[2] RMIT Univ, Sch Appl Phys, Melbourne, Vic 3000, Australia
[3] Monash Univ, Dept Mat Engn, Clayton, Vic 3800, Australia
[4] Monash Univ, Sch Chem, Clayton, Vic 3800, Australia
来源：
ALUMINIUM ALLOYS 2006, PTS 1 AND 2: RESEARCH THROUGH INNOVATION AND TECHNOLOGY | 2006年 / 519-521卷
关键词：
positron annihilation; Al-Cu-Mg-Ag alloys; silicon additions; vacancy concentration;
D O I：
10.4028/www.scientific.net/MSF.519-521.597
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of Si additions on vacancy behavior following solution treatment and quenching was studied for an Al-Cu-Mg-Ag alloy system using positron annihilation lifetime spectroscopy (PALS). Both the initial positron lifetime and steady state positron lifetime increase as the Si concentration increases. This behavior is interpreted in terms of Si interacting with vacancies, leading to their retention in the alloy. The ability of PALS to monitor vacancy behavior after solution treatment should allow the improved prediction of phase transformation kinetics and hence the tailoring of ageing treatments.
引用
收藏
页码：597 / 602
页数：6
相关论文
共 50 条
  • [1] COPPER CLUSTERING AND VACANCY LOSS DURING QUENCHING OF ALUMINIUM-COPPER ALLOYS
    PERRY, AJ
    ACTA METALLURGICA, 1966, 14 (03): : 305 - &
  • [2] VACANCY ORDERED PHASES IN RAPIDLY SOLIDIFIED ALUMINIUM-COPPER ALLOYS.
    Sastry, Gunturi V.S.
    Bariar, Krishna Kumar
    Chattopadhyay, Kamanio
    Ramachandrarao, Patcha
    Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 1980, 71 (11): : 756 - 759
  • [3] EFFECT OF VACANCY/IMPURITY INTERACTION ON RATE OF QUENCH-AGE-HARDENING IN ALUMINIUM-COPPER ALLOYS
    ENTWISTLE, KM
    KOO, KI
    FELL, JH
    JOURNAL OF THE INSTITUTE OF METALS, 1962, 91 (03): : 84 - &
  • [4] Chlorination of aluminium-copper alloys
    De Micco, G.
    Pasquevich, D. M.
    Bohe, A. E.
    THERMOCHIMICA ACTA, 2007, 457 (1-2) : 83 - 91
  • [5] SEGREGATION IN ALUMINIUM-COPPER ALLOYS
    ADAMS, DE
    JOURNAL OF THE INSTITUTE OF METALS, 1949, 75 (10): : 809 - &
  • [6] EQUILIBRIUM VACANCY CONCENTRATION IN AN ALUMINIUM-COPPER ALLOY
    KING, AD
    BURKE, J
    ACTA METALLURGICA, 1970, 18 (02): : 205 - &
  • [7] Hot tearing in aluminium-copper alloys
    Viano, D
    StJohn, D
    Grandfield, J
    Cáceres, C
    LIGHT METALS 2005, 2005, : 1069 - 1073
  • [8] The constitution of aluminium-copper alloys.
    Guillet, L
    COMPTES RENDUS HEBDOMADAIRES DES SEANCES DE L ACADEMIE DES SCIENCES, 1905, 141 : 464 - 467
  • [9] Spray forming of aluminium-copper alloys
    Grant, P.S., 1600, (A134):
  • [10] Features of Alloying and Heat Treatment of High-Strength Casting Aluminium-Copper Alloys
    Smirnov, Oleksiy Mykolayovych
    Berezina, A. L.
    Monastyrska, T. O.
    Fikssen, V. M.
    V. Yashchenko, O.
    Skorobagatko, Yu. P.
    Goryuk, M. S.
    Semenko, A. Yu.
    Karpukhi, E. O.
    Rud, O. D.
    METALLOPHYSICS AND ADVANCED TECHNOLOGIES, 2024, 46 (06)
12345