Effects of Compressor Tip Injection on Aircraft Engine Performance and Stability

This analytical study discusses the system aspects of active stability enhancement using mass flow injection in front of the rotor blade tip of a high pressure compressor. Tip injection is modeled as a recirculating bleed in a performance simulation of a commercial turbofan engine. A map correction procedure accounts for the changes in compressor characteristics caused by injection. The correction factors are derived from stage slacking calculations, which include a simple correlation for stability enhancement. The operational characteristic of the actively controlled engine is simulated in steady and transient states. The basic steady-state effect consists of a local change in mass flow and a local increase in gas temperature. This alters the component matching in the engine. The mechanism can be described by the compressor-to-turbine flow ratio and the injection temperature ratio. Both effects reduce the cycle efficiency resulting in an increased turbine temperature and fuel consumption at constant thrust. The negative performance impact becomes negligible if compressor recirculation is only employed at the transient part power and if valves remain closed at the steady-state operation. Detailed calculations show that engine handling requirements and temperature limits will still be met. Tip injection increases the high pressure compressor stability margin substantially during critical maneuvers. The proposed concept in combination with an adequate control logic offers promising benefits at transient operation, leading to an improvement potential for the overall engine performance. [DOI: 10.1115/1.2988159]