Experimental Study on Flexible Deformation of a Flapping Wing with a Rectangular Planform

A flexible flapping wing with a rectangular planform was designed to investigate the influence of flexible deformation. This planform is more convenient and easier to define and analyzed its deforming properties in the direction of spanwise and chordwise. The flapping wings were created from carbon fiber skeleton and polyester membrane with similar size to medium birds. Their flexibility of deformations was tested using a pair of high-speed cameras, and the 3D deformations were reconstructed using the digital image correlation technology. To obtain the relationship between the flexible deformation and aerodynamic forces, a force/torque sensor with 6 components was used to test the corresponding aerodynamic forces. Experimental results indicated that the flexible deformations demonstrate apparent cyclic features, in accordance with the flapping cyclic movements. The deformations in spanwise and chordwise are coupled together; a change of chordwise rib stiffness can cause more change in spanwise deformation. A certain lag in phase was observed between the deformation and the flapping movements. This was because the deformation was caused by both the aerodynamic force and the inertial force. The stiffness had a significant effect on the deformation, which in turn, affected the aerodynamic and power characteristics. In the scope of this study, the wing with medium stiffness consumed the least power. The purpose of this research is to explore some fundamental characteristics, as well as the experimental setup is described in detail, which is helpful to understand the basic aerodynamic characteristics of flapping wings. The results of this study can provide an inspiration to further understand and design flapping-wing micro air vehicles with better performance.