Research on the limitations of laser energy density and microstructure characteristics of selective laser melted AlSi10Mg alloy

被引：6
|
作者：
Dong, Sensen [1 ]
Zhang, Xiaoxun [1 ]
Ma, Fang [2 ]
Jiang, Juze [1 ]
Yang, Wei [1 ]
机构：
[1] Shanghai Univ Engn Sci, Sch Mat Engn, Shanghai 201620, Peoples R China
[2] Shanghai Univ Engn Sci, Sch Mech & Automot Engn, Shanghai 201620, Peoples R China
来源：
OPTIK | 2020年 / 219卷
基金：
中国国家自然科学基金;
关键词：
Selective laser melting; Track geometry; Melt pool; Microstructure; Microhardness; MECHANICAL-PROPERTIES; PROCESS PARAMETERS; SURFACE-ROUGHNESS; POWDERS; BEHAVIOR; POROSITY; DESIGN; STEEL;
D O I：
10.1016/j.ijleo.2020.165211
中图分类号：
O43 [光学];
学科分类号：
070207 ; 0803 ;
摘要：
In this study, deficiencies in using the laser energy density (LED) to combine different process parameters to represent the heat input in selective laser melting (SLM) process are proposed. The change in melt pool shape could not always be clarified by the LED input, since the vary of LED input caused by altering hatch spacing cannot change the melt pool shape. In addition, the microstructure of SLM fabricated AlSi10Mg material was observed, and this paper gives a further elucidation on the formation of the hierarchical microstructures that discriminated by the morphology of Si phase. Microhardness is enhanced by the supersaturated alpha-Al matrix, and the hardness value of coarse zones and fine zones show different performance.
引用
收藏
页数：12
相关论文
共 50 条
  • [1] Microstructure of selective laser melted AlSi10Mg alloy
    Liu, Xihe
    Zhao, Congcong
    Zhou, Xin
    Shen, Zhijian
    Liu, Wei
    MATERIALS & DESIGN, 2019, 168
  • [2] Research on metallurgical bonding of selective laser melted AlSi10Mg alloy
    Dong, Sensen
    Zhang, Xiaoxun
    Ma, Fang
    Jiang, Juze
    Yang, Wei
    Lin, Zhixiong
    Chen, Chuanbo
    MATERIALS RESEARCH EXPRESS, 2020, 7 (02)
  • [3] Surface characteristics of selective laser melted AlSi10Mg mirrors
    Han X.
    Kang N.
    Jiao J.
    Wang C.
    Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 2020, 51 (11): : 3088 - 3092
  • [4] Formability of Selective Laser Melted AlSi10Mg
    Jokelainen, Tero
    Iso-Junno, Terho
    Jarvenpaa, Antti
    Mustakangas, Aappo
    Keskitalo, Markku
    Mantyjarvi, Kari
    PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2019), 2019, 2113
  • [5] Gradient in microstructure and mechanical property of selective laser melted AlSi10Mg
    Liu, Y. J.
    Liu, Z.
    Jiang, Y.
    Wang, G. W.
    Yang, Y.
    Zhang, L. C.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 735 : 1414 - 1421
  • [6] Microstructure, porosity and mechanical properties of selective laser melted AlSi10Mg
    Chen, Jing
    Hou, Wei
    Wang, Xiuzhuan
    Chu, Songlin
    Yang, Zhiyi
    CHINESE JOURNAL OF AERONAUTICS, 2020, 33 (07) : 2043 - 2054
  • [7] Microstructure, porosity and mechanical properties of selective laser melted AlSi10Mg
    Jing CHEN
    Wei HOU
    Xiuzhuan WANG
    Songlin CHU
    Zhiyi YANG
    Chinese Journal of Aeronautics , 2020, (07) : 2043 - 2054
  • [8] Microstructure, porosity and mechanical properties of selective laser melted AlSi10Mg
    Jing CHEN
    Wei HOU
    Xiuzhuan WANG
    Songlin CHU
    Zhiyi YANG
    Chinese Journal of Aeronautics, 2020, 33 (07) : 2043 - 2054
  • [9] Study on the fatigue behaviour of selective laser melted AlSi10Mg alloy
    Ch, Srinivasa Rakesh
    Raja, A.
    Jayaganthan, R.
    Vasa, N. J.
    Raghunandan, M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 781
  • [10] Crystal plasticity modeling on the selective laser melted AlSi10Mg alloy
    Luo, Z. X.
    He, J. P.
    Li, D. Y.
    Peng, Y. H.
    19TH INTERNATIONAL CONFERENCE ON METAL FORMING, MF 2022, 2022, 1270
12345