Fabrication and structural properties of porous Cu-YSZ cermets for solid oxide fuel cells

被引：8
|
作者：
Kim, C. M. [1 ]
Kim, J. [1 ]
Park, K. [1 ]
机构：
[1] Sejong Univ, Fac Nanotechnol & Adv Mat Engn, Seoul 143747, South Korea
来源：
POWDER TECHNOLOGY | 2014年 / 254卷
关键词：
Solid state reaction; Sintering; Microstructure; Porosity; SOFC; DIRECT OXIDATION; SOFC ANODE; MICROSTRUCTURE; ELECTROLYTES; ZIRCONIA; BEHAVIOR;
D O I：
10.1016/j.powtec.2014.01.007
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
In this study, porous Cu-YSZ cermets with various Cu contents are fabricated and their crystal structure and morphological features are investigated by X-ray diffraction and scanning electron microscopy. Carbon black-containing CuO/Y2O3-stabilized ZrO2 (YSZ) composites exhibit a highly porous structure due to the evolution of CO and CO2 gasses during sintering. The porosity of the CuO/YSZ composites decreases with increases of the sintering temperature and CuO content. Highly porous Cu/YSZ cermets are fabricated by reducing the porous CuO/YSZ composites in (Ar + 6% H-2) atmosphere. Higher CuO content and higher sintering temperature reduce the porosity of Cu/YSZ cermets after reduction treatment. The microstructure and porosity of Cu/YSZ cermets as an anode material are remarkably affected by the CuO content, sintering temperature, and carbon black content. We believe that the porous Cu/YSZ cermets are a promising anode material for high performance of SOFC. (C) 2014 Elsevier B.V. All rights reserved.
引用
收藏
页码：425 / 431
页数：7
相关论文
共 50 条
  • [1] Microstructure and anodic properties of Ni/YSZ cermets in solid oxide fuel cells
    Lee, CH
    Lee, CH
    Lee, HY
    Oh, SM
    SOLID STATE IONICS, 1997, 98 (1-2) : 39 - 48
  • [2] Synthesis of Cu-YSZ and Ni-Cu-YSZ cermets by a novel electroless technique for use as solid oxide fuel cell anode: Application potentiality towards fuel flexibility in biogas atmosphere
    Konar, Rajashree
    Mukhopadhyay, Jayanta
    Das Sharma, Abhijit
    Basu, Rajendra N.
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2016, 41 (02) : 1151 - 1160
  • [3] Cu-YSZ cermet solid oxide fuel cell anode prepared by high-temperature sintering
    Tucker, Michael C.
    Lau, Grace Y.
    Jacobson, Craig P.
    Visco, Steven J.
    De Jonghe, Lutgard C.
    JOURNAL OF POWER SOURCES, 2010, 195 (10) : 3119 - 3123
  • [4] NiO-YSZ cermets supported low temperature solid oxide fuel cells
    Zhang, Xinge
    Robertson, Mark
    Deces-Petit, Cyrille
    Xie, Yongsong
    Hui, Rob
    Yick, Sing
    Styles, Edward
    Roller, Justin
    Kesler, Olivera
    Maric, Radenka
    Ghosh, Dave
    JOURNAL OF POWER SOURCES, 2006, 161 (01) : 301 - 307
  • [5] Evaluation of Elastic and Strength Properties of Ni-YSZ Cermets for Solid Oxide Fuel Cells under Redox Cycling
    Sato, K.
    Miyasaka, T.
    Watanabe, S.
    Hashida, T.
    SOLID OXIDE FUEL CELLS 13 (SOFC-XIII), 2013, 57 (01): : 753 - 762
  • [6] Effect of slurry properties on anode cermets for solid oxide fuel cells
    Sridhar, S
    Pal, UB
    POWDER TECHNOLOGY, 1996, 88 (02) : 173 - 178
  • [7] Fabrication and performance of thin-film YSZ solid oxide fuel cells
    Wang, CH
    Worrell, WL
    Park, S
    Vohs, JM
    Gorte, RJ
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2001, 148 (08) : A864 - A868
  • [8] Electrophoretic deposition of YSZ electrolyte on porous NiO-YSZ substrate for Solid Oxide Fuel Cells
    Talebi, Tahereh
    Raissi, Babak
    Maghsoudipour, Amir
    ELECTROPHORETIC DEPOSITION: FUNDAMENTALS AND APPLICATIONS III, 2009, 412 : 215 - 220
  • [9] Evaluation of Porous Ni-YSZ Cermets with Ni content of 0-30 vol% As Insulating Substrates for Solid Oxide Fuel Cells
    Wang, Zhenwei
    Mori, Masashi
    Itoh, Takanori
    SOLID OXIDE FUEL CELLS 12 (SOFC XII), 2011, 35 (01): : 1631 - 1640
  • [10] Fabrication of NiO/YSZ anode for solid oxide fuel cells by aerosol flame deposition
    Yoon, Yongsub
    Im, Jongmo
    You, Hyunjin
    Shin, Dongwook
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2007, 27 (13-15) : 4257 - 4260
12345