Fracture study of ferritic/martensitic steels using Weibull stress analysis at quasi-static and higher loading rates

被引：5
|
作者：
Tiwari, Abhishek [2 ]
Gopalan, Avinash [1 ]
Shokry, A. [3 ,4 ]
Singh, R. N. [1 ]
Stahle, Per [3 ]
机构：
[1] Bhabha Atom Res Ctr, Mumbai 400085, Maharashtra, India
[2] Homi Bhabha Natl Inst, Mumbai 400094, Maharashtra, India
[3] Lund Univ, Div Solid Mech, S-22100 Lund, Sweden
[4] Fayoum Univ, Dept Ind Engn, Al Fayyum 63514, Egypt
来源：
INTERNATIONAL JOURNAL OF FRACTURE | 2017年 / 205卷 / 01期
关键词：
Master curve; Loading rate; Weibull calibration; Strain rate; MASTER CURVE; CLEAVAGE FRACTURE; TEMPERATURE; PARAMETERS; TOUGHNESS; MODEL; CALIBRATION;
D O I：
10.1007/s10704-017-0184-4
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Effect of loading rate on cleavage failure probability for ferritic/martensitic steels using Weibull stress analysis is studied. Calibration of Weibull slope for two grades of fusion reactor blanket steels namely, Indian Reduced Activation Ferritic/Martensitic Steel referred as In-RAFMS, F 82H and a non fusion grade modified 9Cr-1Mo steel (P91) are performed for the first time. The calibrated values of Weibull slope is used to predict the fracture behaviour of In-RAFMS at three different loading rates. The effect of loading rate is also examined on reference transition temperature using Wallin's correlation based on Zener-Hollomon strain rate parameter.
引用
收藏
页码：103 / 109
页数：7
相关论文
共 40 条
  • [1] Fracture study of ferritic/martensitic steels using Weibull stress analysis at quasi-static and higher loading rates
    Abhishek Tiwari
    Avinash Gopalan
    A. Shokry
    R. N. Singh
    Per Ståhle
    International Journal of Fracture, 2017, 205 : 103 - 109
  • [2] YIELDING BEHAVIOR AND FRACTURE-BEHAVIOR OF FERRITIC STEELS IN THE TRANSITION REGION OF QUASI-STATIC TO DYNAMIC LOADING
    HESSE, W
    BRUNINGHAUS, K
    DAHL, W
    NUCLEAR ENGINEERING AND DESIGN, 1986, 96 (2-3) : 167 - 172
  • [3] Effects of loading rate on the Weibull stress model for simulation of cleavage fracture in ferritic steels
    2000, American Society of Mechanical Engineers (412):
  • [4] On the effect of quasi-static loading rates upon the fracture toughness of ordinary structural steel
    Lorentzon, M
    Eriksson, K
    ECF 11 - MECHANISMS AND MECHANICS OF DAMAGE AND FAILURE, VOLS I-III, 1996, : 443 - 448
  • [5] Influence of quasi-static loading rates on crushable granular materials: A DEM analysis
    Das, Soukat Kumar
    Das, Arghya
    POWDER TECHNOLOGY, 2019, 344 : 393 - 403
  • [6] Quasi-static analysis of elastic behavior for some systems having higher fracture densities
    Berryman, James G.
    Aydin, Atilla
    INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS, 2010, 34 (16) : 1687 - 1724
  • [7] Quasi-static and dynamic fracture behavior of lead zirconate titanate: A study of poling and loading rate
    Mendoza, Isabella
    Drury, Daniel
    Matejunas, Andrew
    Ivy, Jacob
    Koumlis, Stylianos
    Jewell, Peter
    Brennecka, Geoff
    Lamberson, Leslie
    ENGINEERING FRACTURE MECHANICS, 2021, 247
  • [8] Quasi-static and dynamic fracture of graphite/epoxy composites: An optical study of loading-rate effects
    Lee, Dongyeon
    Tippur, Hareesh V.
    Bogert, Phillip
    COMPOSITES PART B-ENGINEERING, 2010, 41 (06) : 462 - 474
  • [9] Experimental and numerical study on failure characteristics and mechanism of coal under different quasi-static loading rates
    Liu, Xuewei
    Chen, Haixiao
    Liu, Bin
    Deng, Wei
    Liu, Quansheng
    Zhang, Zhizhen
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2022, 121
  • [10] A new jig for mode II interlaminar fracture testing of composite materials under quasi-static and moderately high rates of loading
    Caimmi, Francesco
    Frassine, Roberto
    Pavan, Andrea
    ENGINEERING FRACTURE MECHANICS, 2006, 73 (16) : 2277 - 2291
1234