Crack arrest model for a piezoelectric plate - A generalised Dugdale model

The constant search for new materials has provided impetus to research in piezoelectric materials. An anti-plane problem for a cracked unbounded two-dimensional poled piezoelectric plate has been investigated. The crack rims open on account of shear mechanical forces applied at the remote boundary and in-plane electric displacement field prescribed at the infinite boundary. Thus the crack yields both mechanically and electrically. Consequently, a plastic zone and a saturation zone protrude ahead of each tip of the crack. These developed zones are in turn closed by applying yield point shear stress at the rims of plastic zone and normal closing saturation limit displacement on the rims of saturation zones. Two cases are investigated when (i) the developed saturation zone length exceeds that of the developed plastic zone, and (ii) saturation zone length is smaller than that of the plastic zone. Fourier integral transform method is used in each case to obtain the length of plastic zone and saturation zone. Closed form analytic expressions are obtained in each case. Crack opening displacement and potential drop across the rims of the crack are also obtained. The effect of mechanical loads on crack closure in the presence of electric field is investigated and vice-versa. Also energy release rate expressions are obtained for both the cases.