Modeling of delamination using a discretized cohesive zone and damage formulation

被引：73
|
作者：
Borg, R [1 ]
Nilsson, L [1 ]
Simonsson, K [1 ]
机构：
[1] Linkoping Inst Technol, Div Solid Mech, Dept Mech Engn, SE-58183 Linkoping, Sweden
来源：
COMPOSITES SCIENCE AND TECHNOLOGY | 2002年 / 62卷 / 10-11期
关键词：
carbon fibers; laminates; delamination; crack;
D O I：
10.1016/S0266-3538(02)00070-2
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
Delamination initiation and growth are analyzed by using a discrete cohesive crack model. The delamination is constrained to grow along a tied interface. The model is derived by postulating the existence of a maximum load surface which limits the adhesive forces in the process zone of the crack. The size of this maximum load surface is made dependent on the amount of dissipated crack opening work, such that the maximum load surface shrinks to zero as a predefined amount of work is consumed. A damage formulation is used to reduce the adhesive forces. Mode I, II and III loading or any combined loading is possible. An analytical solution is obtained for a single mode opening and the implications of this result on the governing equations is discussed. The delamination model is implemented in the finite element code LS-DYNA and simulation results are shown to be in agreement with experimental results. (C) 2002 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：1299 / 1314
页数：16
相关论文
共 50 条
  • [1] Delamination Modeling in LED Package by Cohesive Zone Method
    Zhang, Bingbing
    Yang, Daoguo
    2013 14TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2013, : 1217 - 1221
  • [2] Delamination Modeling for Power Packages by the Cohesive Zone Approach
    Dudek, R.
    Doering, R.
    Pufall, R.
    Kanert, W.
    Seiler, B.
    Rzepka, S.
    Michel, B.
    2012 13TH IEEE INTERSOCIETY CONFERENCE ON THERMAL AND THERMOMECHANICAL PHENOMENA IN ELECTRONIC SYSTEMS (ITHERM), 2012, : 187 - 193
  • [3] Cohesive Zone Modeling of Mixed-Mode Delamination Testa
    Zhang, Bingbing
    Yang, Daoguo
    Ernst, Leo
    2013 14TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2013, : 559 - +
  • [4] Modeling of Mixed-Mode Delamination by Cohesive Zone Method
    Zhang, Bingbing
    Yang, Daoguo
    Ernst, Leo
    Pape, Heinz
    2013 14TH INTERNATIONAL CONFERENCE ON THERMAL, MECHANICAL AND MULTI-PHYSICS SIMULATION AND EXPERIMENTS IN MICROELECTRONICS AND MICROSYSTEMS (EUROSIME), 2013,
  • [5] Cohesive zone modeling of interfacial delamination in PZT thin films
    Yan, Yabin
    Shang, Fulin
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2009, 46 (13) : 2739 - 2749
  • [6] Fatigue damage modeling in solder interconnects using a cohesive zone approach
    Abdul-Baqi, A
    Schreurs, PJG
    Geers, MGD
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2005, 42 (3-4) : 927 - 942
  • [7] Prediction of delamination growth in laminated composites using acoustic emission and Cohesive Zone Modeling techniques
    Saeedifar, Milad
    Fotouhi, Mohamad
    Najafabadi, Mehdi Ahmadi
    Toudeshky, Hossein Hosseini
    COMPOSITE STRUCTURES, 2015, 124 : 120 - 127
  • [8] Numerical simulation of delamination growth in fiber reinforced polymer laminates using cohesive zone modeling
    Kumar, Millan
    Kumar, Pramod
    Bhadauria, Shailendra Singh
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2022, 29 (02) : 213 - 229
  • [9] Stochastic modeling of delamination growth in unidirectional composite DCB specimens using cohesive zone models
    Shanmugam, Venkateswaran
    Penmetsa, Ravi
    Tuegel, Eric
    Clay, Stephen
    COMPOSITE STRUCTURES, 2013, 102 : 38 - 60
  • [10] MACHINE LEARNING-AIDED COHESIVE ZONE MODELING OF FATIGUE DELAMINATION
    Zhang, Liang
    Liu, Xin
    Tian, Su
    Gao, Zhenyuan
    Yu, Wenbin
    PROCEEDINGS OF ASME 2023 AEROSPACE STRUCTURES, STRUCTURAL DYNAMICS, AND MATERIALS CONFERENCE, SSDM2023, 2023,
12345