Precipitates and corrosion resistance of an Al-Zn-Mg-Cu-Zr plate with different percentage reduction per passes

被引：6

作者：

Liu, Yu-Hao ^{[1
]}

Yan, Liang-Ming ^{[1
]}

Hou, Xiao-Hu ^{[1
]}

Huang, Dong-Nan ^{[1
]}

Zhang, Jian-Bo ^{[2
]}

Shen, Jian ^{[3
]}

机构：

[1] Inner Mongolia Univ Technol, Sch Mat Sci & Engn, Hohhot 010051, Peoples R China

[2] Jiangxi Univ Sci & Technol, Inst Engn & Res, Ganzhou 341000, Peoples R China

[3] Gen Res Inst Nonferrous, State Key Lab Nonferrous Met & Proc, Beijing 100088, Peoples R China

来源：

RARE METALS | 2018年 / 37卷 / 05期

基金：

中国国家自然科学基金;

关键词：

7055 aluminum alloy; Microstructure; Rolling; Corrosion resistance; MECHANICAL-PROPERTIES; ALUMINUM-ALLOY; TEXTURE EVOLUTION; MICROSTRUCTURE; STRENGTH; BEHAVIOR; STRAIN; RECRYSTALLIZATION; TEMPERATURE;

D O I：

10.1007/s12598-017-0996-4

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

7055 aluminum alloy plates with the same size were rolled by two processes: small percentage reduction per pass (PRPP) and large percentage reduction per pass, respectively. Meanwhile, the effect of PRPP on the precipitates and corrosion resistance of 7055 aluminum alloy plate was investigated. The mechanisms were analyzed and discussed by optical microscopy (OM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM) and electron back-scattered diffraction (EBSD) technique. Large PRPP can improve the corrosion resistance. For the plate rolled by small PRPP, the main precipitate is guinier-preston (GP) zone and continuous grain boundary precipitates (GBPs), while, for the plate rolled by large PRPP, the main precipitates are the GP zone and eta' precipitate, and the GBPs are discontinuous.

引用

页码：381 / 387

页数：7

共 50 条

[1] Precipitates and corrosion resistance of an Al-Zn-Mg-Cu-Zr plate with different percentage reduction per passes
Yu-Hao Liu
Liang-Ming Yan
Xiao-Hu Hou
Dong-Nan Huang
Jian-Bo Zhang
Jian Shen
Rare Metals, 2018, 37 (05) : 381 - 387
[2] Precipitates and corrosion resistance of an Al–Zn–Mg–Cu–Zr plate with different percentage reduction per passes
Yu-Hao Liu
Liang-Ming Yan
Xiao-Hu Hou
Dong-Nan Huang
Jian-Bo Zhang
Jian Shen
Rare Metals, 2018, 37 : 381 - 387
[3] Evolution of Microstructure, Mechanical Properties and Homogeneity of Al-Zn-Mg-Cu-Zr Alloy Plates Prepared by Different Percentage Reductions per Pass
Yan Liangming
Hui Qiang
Wang Wenbo
Hou Xiaohu
Xu Junrui
Liu Huimin
Shen Jian
RARE METAL MATERIALS AND ENGINEERING, 2021, 50 (07) : 2315 - 2320
[4] Effect of High Pressure Torsion on Stress Corrosion Resistance of Al-Zn-Mg-Cu-Zr Alloy
Li Ping
Wu Guangshan
Xuefeng, Wei
Wang Boxiaotian
Yan Siliang
Xue Kemin
RARE METAL MATERIALS AND ENGINEERING, 2019, 48 (09) : 2981 - 2986
[5] Effect of High Pressure Torsion on Stress Corrosion Resistance of Al-Zn-Mg-Cu-Zr Alloy
Li, Ping
Wu, Guangshan
Wei, Xuefeng
Wang, Boxiaotian
Yan, Siliang
Xue, Kemin
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2019, 48 (09): : 2981 - 2986
[6] EXTRUSION OF AL-ZN-MG-CU-ZR ALLOYS
BALASUBRAMANIAN, PK
MATERIALS SCIENCE AND TECHNOLOGY, 1985, 1 (06) : 470 - 474
[7] Evolution of MicrostructEvolution Microstructure, Mechanical Properties and Homogeneity of Al-Zn-Mg-Cu-Zr Alloy Plates Prepared by Different Percentage Reductions per Pass
Yan, Liangming
Hu, Qiang
Wang, Wenbo
Hou, Xiaohu
Xu, Junrui
Liu, Huimin
Shen, Jian
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2021, 50 (07): : 2315 - 2320
[8] Effect of recrystallization on intergranular fracture and corrosion of Al-Zn-Mg-Cu-Zr alloy
Fang, H. C.
Chao, H.
Chen, K. H.
JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 622 : 166 - 173
[9] Enhancing stress corrosion cracking resistance in Al-Zn-Mg-Cu-Zr alloy through inhibiting recrystallization
Kannan, M. Bobby
Raja, V. S.
ENGINEERING FRACTURE MECHANICS, 2010, 77 (02) : 249 - 256
[10] EFFECT OF SURFACE-TREATMENT ON FATIGUE PROPERTIES OF AL-LI-CU-MG-ZR AND AL-ZN-MG-CU-ZR PLATE
GREGSON, PJ
NEWMAN, J
GRAY, A
MATERIALS SCIENCE AND TECHNOLOGY, 1989, 5 (01) : 65 - 70

← 1 2 3 4 5 →