Microstructure and mechanical properties of WC or Mo2C modified NbC-Ni cermets

被引：22

作者：

Huang, J. H. ^{[1
]}

Huang, S. G. ^{[1
]}

Zhou, P. ^{[2
]}

Lauwers, B. ^{[3
,4
]}

Qian, J. ^{[3
,4
]}

Vleugels, J. ^{[1
]}

机构：

[1] Katholieke Univ Leuven, Dept Mat Engn, Leuven, Belgium

[2] Hunan Univ Sci & Technol, Hunan Prov Key Def Lab High Temp Wear Resisting M, Changsha, Hunan, Peoples R China

[3] Katholieke Univ Leuven, Dept Mech Engn, Leuven, Belgium

[4] Flanders Make, Leuven, Belgium

来源：

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS | 2021年 / 95卷

关键词：

Niobium carbide; Cermets; Liquid phase sintering; Microstructure; Mechanical properties; GRAIN-GROWTH; PHASE; FRACTURE;

D O I：

10.1016/j.ijrmhm.2020.105440

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study, the influence of up to 15 vol% WC or Mo2C addition to Ni bonded NbC matrix cermets, prepared by pressureless liquid phase sintering in vacuum for 90 min at 1390 degrees C was assessed. The constituent phases and W/Mo dissolution in the Ni binder and NbC phases were simulated by thermodynamic modelling. Microstructure and phase analysis using XRD and SEM indicated that the WC or Mo2C modified NbC based cermets were composed of a (Nb,W)C or (Nb,Mo)C solid solution cubic phase dispersed in a cubic Ni alloy binder. Residual WC was present in the cermets with >= 10 vol% WC addition, whereas up to 15 vol% Mo2C addition completely dissolved into the NbC cermets. The phase evolution and influence of the WC/Mo2C content on the solid solution formation is discussed and the fracture toughness, Vickers hardness and transverse rupture strength was assessed.

引用

页数：12

共 50 条

[1] Microstructure and tribological performance of NbC-Ni cermets modified by VC and Mo2C
Huang, S. G.
Vleugels, J.
Mohrbacher, H.
Woydt, M.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2017, 66 : 188 - 197
[2] Structure and mechanical properties of TiAlCrSiN coatings deposited on Ti (C,N)-NbC-Ni cermets with varied Mo2C contents
Ni, Lei
Yang, Tianen
Xiong, Ji
Fei, Yuhuan
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2020, 86
[3] Microstructure and mechanical properties of NbC-Ni cermets prepared by microwave sintering
Tang, Siwen
Zhang, Hao
Yang, Zhifu
Liu, Qian
Lv, Zheng
Ouyang, Cong
Qiu, Xinyi
HIGH TEMPERATURE MATERIALS AND PROCESSES, 2022, 41 (01) : 482 - 492
[4] NbC-Ni based cermets: Phase diagrams, microstructure and mechanical properties
Huang, S. G.
Liu, C.
Liu, B. L.
Anwer, Z.
Vleugels, J.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2025, 128
[5] Effect of Carbon Content on the Microstructure and Mechanical Properties of NbC-Ni Based Cermets
Huang, Shuigen
De Baets, Patrick
Sukumaran, Jacob
Mohrbacher, Hardy
Woydt, Mathias
Vleugels, Jozef
METALS, 2018, 8 (03)
[6] Effect of Mo2C on the Microstructure and Mechanical Properties of (Ti, W)C–Ni Cermets
Chengliang Han
Changan Tian
Powder Metallurgy and Metal Ceramics, 2014, 53 : 57 - 63
[7] Influence of AlN addition on the microstructure, mechanical properties and oxidation characteristics of NbC-Ni cermets
Yi, Jiyong
Xie, Sixing
Chen, Li
Yan, Dike
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2024, 118
[8] Effect of Mo2C on the Microstructure and Mechanical Properties of (Ti, W)C-Ni Cermets
Han, Chengliang
Tian, Changan
POWDER METALLURGY AND METAL CERAMICS, 2014, 53 (1-2) : 57 - 63
[9] Study on the microstructure and mechanical properties of microwave sintered NbC-Ni cermets reinforced by multilayer graphene
Zhang, Hao
Tang, Siwen
Lu, Ji
Liu, Qian
Niu, Qiulin
CERAMICS INTERNATIONAL, 2023, 49 (12) : 20127 - 20137
[10] Microstructure and mechanical properties of TiC reinforced NbC-Ni4VC4Mo2C cermets
Malik, Asad
Basit, Abdul
Ijaz, Muhammad Farzik
Anwar, Furqan
Umer, Malik Adeel
Shao, Yang
MATERIALS RESEARCH EXPRESS, 2024, 11 (09)

← 1 2 3 4 5 →