The influence of calendering parameters on performance properties of needle-punched nonwoven cleaning materials including r-PET fiber

被引：9
|
作者：
Cincik, Emel [1 ]
Gunaydin, Emirhan [1 ]
机构：
[1] Erciyes Univ, Dept Text Engn, Kayseri, Turkey
来源：
JOURNAL OF THE TEXTILE INSTITUTE | 2017年 / 108卷 / 02期
关键词：
Needle-punched nonwovens; recycled polyester; calendering parameters; roll clearance; temperature; THERMOMECHANICAL BEHAVIOR; BONDING VARIABLES; RECYCLED PET; RESPONSES; FABRICS;
D O I：
10.1080/00405000.2016.1161694
中图分类号：
TB3 [工程材料学]; TS1 [纺织工业、染整工业];
学科分类号：
0805 ; 080502 ; 0821 ;
摘要：
The aim of this study is to investigate the effect of calendaring process parameters on performance properties of needle-punched nonwoven materials including recycled polyester (r-PET) fiber. For this purpose; nonwoven materials produced by carding and needling processes with two different blend ratios have been calendered with different temperatures and roll clearances. The physical and performance properties of the samples such as thickness, bulk density, abrasion resistance, water absorption properties have been determined according to the standard test methods. The results derived from the tests were statistically evaluated by Design Expert((R)) software and the effects of chosen parameters on physical and performance properties of the samples were assessed. It was observed that additional thermal bonding process with calendering enhanced the performance properties compared to non-calendered samples and the excessive increase in calendering parameters yields to decrease in abrasion resistance and water absorption capacity.
引用
收藏
页码：216 / 225
页数：10
相关论文
共 28 条
  • [1] Research on Properties of Aramid Fiber Needle-Punched Nonwoven Fabrics
    Shi, Lei
    Zhuang, Xupin
    Jiao, Xiaoning
    Li, Menqin
    Li, Hongjun
    Cheng, Bowen
    ADVANCED TEXTILE MATERIALS, PTS 1-3, 2011, 332-334 : 1253 - +
  • [2] Influence of the Processing Mode of Nonwoven Needle-Punched Materials on Air Filtration
    V. G. Nazarov
    A. V. Dedov
    Fibre Chemistry, 2021, 53 : 143 - 148
  • [3] Influence of the Processing Mode of Nonwoven Needle-Punched Materials on Air Filtration
    Nazarov, V. G.
    Dedov, A., V
    FIBRE CHEMISTRY, 2021, 53 (02) : 143 - 148
  • [4] Influence of fiber surface purity on wicking properties of needle-punched nonwoven after oxygen plasma treatment
    Verschuren, J
    Van Herzele, P
    De Clerck, K
    Kiekens, P
    TEXTILE RESEARCH JOURNAL, 2005, 75 (05) : 437 - 441
  • [5] Influence of Volume Density of Nonwoven Needle-Punched Fabrics on their Permeability and Mechanical Properties
    Dedov, A. V.
    Kuznetsov, V. A.
    Nazarov, V. G.
    FIBRE CHEMISTRY, 2020, 51 (06) : 440 - 443
  • [6] Multi-Fiber Blended Needle-Punched Nonwoven With Oleophilic and Self-Cleaning Properties for Oil Spill Cleanup
    Yesuf, Hanur Meku
    Aweke, Merem Hassen
    Islam, Syed Rashedul
    Zhang, Xueping
    Qin, Xiaohong
    ADVANCED MATERIALS TECHNOLOGIES, 2025,
  • [7] Influence of Volume Density of Nonwoven Needle-Punched Fabrics on their Permeability and Mechanical Properties
    A. V. Dedov
    V. A. Kuznetsov
    V. G. Nazarov
    Fibre Chemistry, 2020, 51 : 440 - 443
  • [8] Influence of Processing Parameters on Properties of Needle-punched Composite Geotextiles
    李婕
    储才元
    杨金魁
    张键
    Journal of DongHua University, 2001, (04) : 88 - 90
  • [9] Effect of process parameters on properties of polypropylene and kenaf fibres needle-punched nonwoven geotextiles
    Tshifularo, Cyrus
    Anandjiwala, Rajesh
    Patriaik, Asis
    INDIAN JOURNAL OF FIBRE & TEXTILE RESEARCH, 2020, 45 (03) : 274 - 285
  • [10] Effect of process parameters on properties of polypropylene and kenaf fibres needle-punched nonwoven geotextiles
    Tshifularo, Cyrus
    Anandjiwala, Rajesh
    Patnaik, Asis
    Indian Journal of Fibre and Textile Research, 2020, 45 (03): : 274 - 285
123