Turning of brasses using minimum quantity of lubricant (MQL) and flooded lubricant conditions

被引：116
|
作者：
Davim, J. Paulo
Sreejith, P. S. [1 ]
Silva, J.
机构：
[1] Cochin Univ Sci & Technol, Sch Engn, Dept Mech Engn, Cochin 682022, Kerala, India
[2] Univ Aveiro, Dept Mech Engn, P-3800 Aveiro, Portugal
来源：
MATERIALS AND MANUFACTURING PROCESSES | 2007年 / 22卷 / 01期
关键词：
brass; chips; cutting power; flood lubricant; minimal quantity lubrication; MQL; surface roughness; turning;
D O I：
10.1080/10426910601015881
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A lot of effort is being carried out to reduce the use of lubricants in metal machining operations from the viewpoint of cost, ecology and human health issues. Minimal quantity lubrication (MQL) is now an established alternative to conventional flood lubricant system. This paper reports on the experimental work carried out during turning of brasses with different amounts of MQL. Turning with flood lubrication was also performed and a comparison is made. The various parameters studied include the feed, cutting power, specific cutting power, and surface roughness. The results of the study suggest that with proper selection of the MQL system, results similar to flood lubricant condition can be achieved.
引用
收藏
页码：45 / 50
页数：6
相关论文
共 50 条
  • [1] The minimum quantity of lubricant (MQL) technique in the surface grinding of steel
    Bianchi, E. C.
    Destro, R. S.
    Oikawa, M. H.
    Sousa, R. M.
    Canarim, R. C.
    Damasceno, R. F.
    Aguiar, P. R.
    Sampaio Alves, M. C.
    TRIBOLOGY AND DESIGN, 2010, : 249 - +
  • [2] Analysis of surface integrity for minimum quantity lubricant -: MQL in grinding
    da Silva, Leonardo Roberto
    Bianchi, Eduardo Carlos
    Fusse, Ronaldo Yoshinobu
    Catai, Rodrigo Eduardo
    Franca, Thiago Valle
    Aguiar, Paulo Roberto
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2007, 47 (02): : 412 - 418
  • [3] SOME STUDIES ABOUT MACHINING OF MMC'S BY MQL(MINIMUM QUANTITY OF LUBRICANT) CONDITIONS
    Davim, J. Paulo
    Sreejith, P. S.
    Silva, J.
    ADVANCED COMPOSITES LETTERS, 2009, 18 (01) : 21 - 23
  • [4] Analysis of the application of the minimum quantity lubricant -: MQL technique in the grinding process
    da Silva, L. R.
    Bianchi, E. C.
    Fusse, R. Y.
    Franca, T. V.
    Catai, R. E.
    Aguiar, P. R.
    INDUSTRIAL DIAMOND REVIEW, 2007, (01): : 65 - +
  • [5] Analysis of the application of the minimum quantity lubricant - MQL technique in the grinding process
    Centro Federal de Educação Tecnológica de Minas Gerais , Department of Mechanical Engineering, 30480-000 Belo Horizonte MG, Brazil
    不详
    不详
    不详
    Ind Diamond Rev, 2007, 1 (65-70):
  • [6] Machining of 6061 aluminium alloy with MQL, dry and flooded lubricant conditions
    Sreejith, P. S.
    MATERIALS LETTERS, 2008, 62 (02) : 276 - 278
  • [7] Characterization of Cutting Parameters in the Minimum Quantity Lubricant (MQL) Machining Process of a Gearbox
    Travieso-Rodriguez, J. A.
    Gomez-Gras, G.
    Garcia-Vilana, Silvia
    Mainau-Noguer, Ferran
    Jerez-Mesa, R.
    INTERNATIONAL JOURNAL OF MANUFACTURING MATERIALS AND MECHANICAL ENGINEERING, 2015, 5 (01) : 49 - 60
  • [8] Using a minimum quantity of lubricant (MQL) and a diamond coated tool in the drilling of aluminum-silicon alloys
    Braga, DU
    Diniz, AE
    Miranda, GWA
    Coppini, NL
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 122 (01) : 127 - 138
  • [9] Recent Progress on Lubricant Characteristics of Minimum Quantity Lubrication (MQL) Technology in Green Cutting
    Yuan, Songmei
    Zhu, Guangyuan
    Wang, Li
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2017, 53 (17): : 131 - 140
  • [10] Environmentally friendly manufacturing: Behavior analysis of minimum quantity of lubricant - MQL in grinding process
    Silva, Leonardo R.
    Correa, Elaine C. S.
    Brandao, Joel Romano
    de Avila, Renato F.
    JOURNAL OF CLEANER PRODUCTION, 2020, 256
12345