FE/test correlation and validation of a BIW modal analysis

被引：0

作者：

Cesteros, B. ^{[1
]}

Hidalgo, A. ^{[1
]}

Morcillo, M. A. ^{[1
]}

Ortega, A. ^{[1
]}

Selgas, C. ^{[1
]}

机构：

[1] CIDAUT, Dept Acoust & Vibrat Res, Valladolid 47151, Spain

来源：

Proceedings of ISMA 2004: International Conference on Noise and Vibration Engineering, Vols 1-8 | 2005年

关键词：

D O I：

暂无

中图分类号：

O42 [声学];

学科分类号：

070206 ; 082403 ;

摘要：

Numeric simulation today is a fundamental tool in the development of new components. Validity of results must be evaluated using experimental measurements. In this paper, the objective is the simulation and validation of a body in white (BIW). The experimental modal analysis was carried out with the direct measurement of nearly 300 points, and the mode shapes were estimated using the software LMS Cada-X. The finite element model used for the simulation with MSC Nastran had more than a million dof. LMS Pre-Test is used to reduce the degrees of freedom from the FE model to the test ones. There are different methods to asses the quality of the finite element model, by comparing analytical and experimental modal parameters: MAC, CoMAC, Spider graph... Based on the outcome of the correlation analysis from LMS Gateway, the analytical models can be updated such that they more accurately predict the actual test results.

引用

页码：1769 / 1777

页数：9

共 50 条

[1] BIW modal analysis and research based on the NVH
Li, Maoting
Yan, Huajin
Ai, Liming
MECHANICAL ENGINEERING, MATERIALS AND ENERGY II, 2013, 281 : 299 - 303
[2] Modal Analysis of Passenger Car Exhaust System and Validation with Physical Test
Patil, Vijay
Khan, S. N.
TECHNO-SOCIETAL 2018: PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ADVANCED TECHNOLOGIES FOR SOCIETAL APPLICATIONS - VOL 2, 2020, : 207 - 214
[3] Test strategy for component modal test for model validation
Perinpanayagam, S.
Ewins, D. J.
Proceedings of ISMA 2004: International Conference on Noise and Vibration Engineering, Vols 1-8, 2005, : 3151 - 3165
[4] Research on Static Stiffness Test System for BIW
Liu, Wei
Wang, Linglong
Wang, Chunhui
FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE IV, PTS 1-5, 2014, 496-500 : 1269 - +
[5] MODAL TEST ANALYSIS CORRELATION FOR THE CENTAUR-G PRIME LAUNCH VEHICLE
CHEN, J
ROSE, T
TRUBERT, M
WADA, B
SHAKER, F
JOURNAL OF SPACECRAFT AND ROCKETS, 1987, 24 (05) : 423 - 429
[6] Modal Test-Analysis Correlation Using Left-Hand Eigenvectors
Coppolino, Robert N.
TOPICS IN MODAL ANALYSIS & TESTING, VOL 8, 2020, : 301 - 310
[7] Comparison between stiffness through finite element analysis and test of car BIW
Ma, Li-Ming
Zhu, Zhi-Min
Yang, Bin
Yao, Bin
Chang'an Daxue Xuebao (Ziran Kexue Ban)/Journal of Chang'an University (Natural Science Edition), 2013, 33 (06): : 110 - 114
[8] Validation of an FE model of an implanted thrust plate prosthesis using modal analysis.
Taylor, WR
Roland, E
Klabunde, R
Ploeg, H
Clift, SE
COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING - 3, 2001, : 39 - 44
[9] The correlation of a steering column FE and experimental modal models
Drinan, TH
Herring, RA
IMAC-XVIII: A CONFERENCE ON STRUCTURAL DYNAMICS, VOLS 1 AND 2, PROCEEDINGS, 2000, 4062 : 428 - 432
[10] Correlation of numerical and experimental analysis for dynamic behaviour of a body-in-white (BIW) structure
Abdullah, N. A. Z.
Sani, M. S. M.
Rahman, M. M.
Zaman, I.
2ND INTERNATIONAL CONFERENCE ON AUTOMOTIVE INNOVATION AND GREEN VEHICLE (AIGEV 2016), 2017, 90

← 1 2 3 4 5 →