Development of a lightweight BMC material using fly ash

被引：5
|
作者：
Lee, Taeheui [1 ]
Jeong, Kyuwon [1 ]
Kim, Duckho [2 ]
机构：
[1] Chungbuk Natl Univ, Dept Mech Engn, 1 Chungdae Ro, Cheongju 28644, Chungcheongbuk, South Korea
[2] Geokwang Ind, 507 Gusan Ri, Ducksan Myun 365841, Jincheon Gun, South Korea
来源：
ADVANCED COMPOSITE MATERIALS | 2017年 / 26卷 / 01期
关键词：
BMC; FRP; glass fiber; fly ash; FEM; MISO; COMPOSITE;
D O I：
10.1080/09243046.2016.1187821
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
Many mechanical and electrical devices are produced by the bulk molding compound (BMC) process, as it has many advantages, such as its fast producing speed and good surface conditions. To increase the strength, many kinds of agents, such as glass or carbon fiber, are added. In this paper, a new composition of BMC is developed using fly ash as a filler agent so that products using the developed BMC are very light and inexpensive. In addition, since fly ash is obtained by collecting exhaust gas, it is quite eco-friendly. For the developed material, the mechanical properties are obtained by a simple tensile test, and the appropriate FEM analysis option parameters are selected by comparing them with the experimental results. Therefore, the parameters can be used in designing products using the developed BMC material.
引用
收藏
页码：55 / 64
页数：10
相关论文
共 50 条
  • [1] Development of lightweight construction material from alkali activated fly ash
    Philadelphia University, Philadelphia PA, 191444, United States
    不详
    不详
    J Solid Waste Technol Manage, 2009, 3 (127-134):
  • [2] Development of sustainable lightweight concrete using fly ash cenosphere and sintered fly ash aggregate
    Satpathy, H. P.
    Patel, S. K.
    Nayak, A. N.
    CONSTRUCTION AND BUILDING MATERIALS, 2019, 202 : 636 - 655
  • [3] Development of low permittivity material using fly ash
    Singh, K
    Quazi, T
    Upadhyay, S
    Sakharkar, P
    INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2005, 12 (04) : 345 - 350
  • [4] Behaviour of lightweight fill material using fly ash and expanded polystyrene beads
    Rathan Lal, B Ram
    Shekhawat, B.S.
    Gatfane, U.B.
    Rahangdale, V.
    Satpute, V.S.
    Sawarkar, B.R.
    International Journal of Earth Sciences and Engineering, 2014, 7 (04): : 1576 - 1581
  • [5] Development of Backfilling Material Using Fly Ash by Application of Chemical Injection
    Shimada, Hideki
    Yoshida, Yasuhiro
    Senda, Takashi
    Maeda, Yasutaka
    Sasaoka, Takashi
    Fujita, Shuichi
    Matsui, Kikuo
    Watanabe, Dai
    INZYNIERIA MINERALNA-JOURNAL OF THE POLISH MINERAL ENGINEERING SOCIETY, 2013, (02): : 42 - 47
  • [6] Development of classified fly ash as a pozzolanic material
    Graduate School, Department of Civil Engineering, Khon Khen University, Khon Kaen 40002, Thailand
    不详
    J. Appl. Sci., 2008, 6 (1097-1102):
  • [7] Development of Lightweight Aggregate Concrete Containing Pulverized Fly ash and Bottom Ash
    Litsomboon, Theradej
    Nimityongskul, Pichai
    Anwar, Naveed
    ADVANCES IN CONCRETE AND STRUCTURES, 2009, 400-402 : 379 - +
  • [8] Development of lightweight ceramic construction materials based on fly ash
    Tuna Aydin
    Journal of the Australian Ceramic Society, 2017, 53 : 109 - 115
  • [9] Development of lightweight ceramic construction materials based on fly ash
    Aydin, Tuna
    JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, 2017, 53 (01) : 109 - 115
  • [10] Fly ash lightweight material of the cellular concrete type using sol-gel and thermal treatment
    Magdaleno Lopez, C.
    Perez Bueno, J. J.
    Mendoza Lopez, M. L.
    Reyes Araiza, J. L.
    Manzano-Ramirez, A.
    CONSTRUCTION AND BUILDING MATERIALS, 2019, 206 : 512 - 518
12345