Effect of the plastic hinge and boundary conditions on the impact behavior of reinforced concrete beams

This study numerically investigates the effect of the plastic hinge and boundary conditions on the behavior of reinforced concrete (RC) beams under slow-impact-velocity events. Numerical models are developed by using LS-Dyna and verified against experimental results. The effect of different factors including the impact velocity, projectile weight, and concrete strength on the impact behavior of RC beams is examined. The numerical results have shown that the effect of boundary condition is marginal on the impact force but significant on the displacement and damage of relatively long beams. Determining the structural stiffness of a beam in an equivalent single degree of freedom model for predicting the impact load should consider the plastic hinge formation and stationary location. And this model is not necessarily suitable for predicting the peak beam response since it is independent of the boundary conditions when the impact velocity is fast. The negative bending moment of the simply-supported beam occurs with a large magnitude which needs to be taken into account in the design. The residual displacement is more sensitive to the boundary conditions than the peak displacement. Varying concrete strength from 20 MPa to 100 MPa does not noticeably change the impact force and displacement but significantly affects the failure mode of the beam. (C) 2016 Elsevier Ltd. All rights reserved.