Simulation of Methanol Synthesis in Packed Bed Reactor for Utilization of CO2 from Acid Gas Removal Unit

被引:4
|
作者
Adji, Bayu Sari [1 ]
Muharam, Yuswan [1 ]
Kartohardjono, Sufrasno [1 ]
机构
[1] Univ Indonesia, Chem Engn Dept, Depok 16424, Indonesia
关键词
methanol synthesis; packed bed reactor; renewable energy; production rate; HYDROGENATION; ABSORPTION; CAPTURE;
D O I
10.1051/e3sconf/20186703005
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
There are many oil and gas fields in Indonesia which contain high CO2 that need to be treated. The Acid Gas Removal Unit (AGRU) is installed to remove the CO2. The AGRU will release the CO2 gas from the regeneration column. It still contains a high concentration of CO2 (higher than 80%). The accumulation of CO2 emission to the atmosphere will impact the environment. To promote environment-friendly technology, the process can be improved with conversion of CO2 into methanol. It will provide a relatively closed loop of the carbon cycle and as a renewable energy alternative. This study aims to provide packed bed reactor design which can be implemented in the small-scale methanol production plant utilizing high CO2 feed gas. The reactor temperature was varied from 200 degrees C to 250 degrees C and pressure were operated in the range of 40 Bar up to 75 Bar. These variations were used to analyze the effects of methanol production. The simulation results showed that peak methanol production rate was achieved at the temperature around 230 degrees C. As the conclusion, the reactor showed better performance at the higher pressure and higher temperature although the reaction is exothermic including the recycling process can reduce the cost of hydrogen.
引用
收藏
页数:5
相关论文
共 50 条
  • [1] Hybrid model formulation for the unsteady state simulation of a packed bed reactor for CO2 hydrogenation to methanol
    Zahedi, G.
    Elkamel, A.
    Lohi, A.
    Jahanmiri, A.
    Rahimpor, M. R.
    Computational Methods, Pts 1 and 2, 2006, : 143 - 147
  • [2] CFD simulation and sensitivity analysis of an industrial packed bed methanol synthesis reactor
    Jamshidi, Shaghayegh
    Sedaghat, Mohammad Hadi
    Amini, Ali
    Rahimpour, Mohammad Reza
    CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION, 2023, 183
  • [3] Combined capture and reduction of CO2 to methanol using a dual-bed packed reactor
    Wirner, Luca C.
    Kosaka, Fumihiko
    Sasayama, Tomone
    Liu, Yanyong
    Urakawa, Atsushi
    Kuramoto, Koji
    CHEMICAL ENGINEERING JOURNAL, 2023, 470
  • [4] Modelling and simulation of a single slit micro packed bed reactor for methanol synthesis
    Bakhtiary-Davijany, Hamidreza
    Hayer, Fatemeh
    Phan, Xuyen Kim
    Myrstad, Rune
    Venvik, Hilde J.
    Pfeifer, Peter
    Holmen, Anders
    CATALYSIS TODAY, 2020, 343 (343) : 226 - 233
  • [5] Model validation of a packed bed LTA membrane reactor for the direct synthesis of DME from CO/CO2
    Ateka, Ainara
    Rodriguez-Vega, Pablo
    Cordero-Lanzac, Toms
    Bilbao, Javier
    Aguayo, Andres T.
    CHEMICAL ENGINEERING JOURNAL, 2021, 408
  • [6] CO2 REMOVAL FROM SYNTHESIS GAS
    TRUBY, HA
    LEWIS, JL
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1974, : 11 - 11
  • [7] Analysis of a 2-D model of a packed bed reactor for methanol production by means of CO2 hydrogenation
    Leonzio, Grazia
    Foscolo, Pier Ugo
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2020, 45 (18) : 10648 - 10663
  • [8] CO2 removal by Ca-based sorbents in a packed-bed reactor: Kinetic study and aspen plus simulation
    Farrokhi, M.
    Heydarzadeh, H. D.
    Nouri, S. M. M.
    ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2017, 39 (09) : 867 - 873
  • [9] Removal of CO2 from indoor air by alkanolamine in a rotating packed bed
    Cheng, Hsu-Hsiang
    Tan, Chung-Sung
    SEPARATION AND PURIFICATION TECHNOLOGY, 2011, 82 : 156 - 166
  • [10] Study of simultaneous mass transfer and nucleation in cryogenic packed bed for the removal of CO2 from natural gas
    Ali, Abulhassan
    Ashraf, Atif M.
    Shariff, Azmi B. M.
    Ganguly, Saibal
    PROCESS AND ADVANCED MATERIALS ENGINEERING, 2014, 625 : 229 - 232