High pressure strength of carbon fibre reinforced vinylester and epoxy vessels

被引：14

作者：

Shao, Yongzheng ^{[1
]}

Betti, Andrea ^{[1
,2
]}

Carvelli, Valter ^{[2
]}

Fujii, Toru ^{[1
]}

Okubo, Kazuya ^{[1
]}

Shibata, Ou ^{[3
]}

Fujita, Yukiko ^{[3
]}

机构：

[1] Doshisha Univ, Dept Mech Engn & Syst, Kyotonabe City, Kyoto 6100394, Japan

[2] Politecn Milan, Dept ABC, Piazza Leonardo da Vinci 32, I-20133 Milan, Italy

[3] DIC Polymers Grp, 1-3 Takasago, Takaishi City, Osaka 5920001, Japan

来源：

COMPOSITE STRUCTURES | 2016年 / 140卷

关键词：

Carbon fibres; Vinylester; Epoxy; Pressure vessel; Damage; Burst pressure; COMPOSITE; MECHANISMS; BEHAVIOR; MATRIX; DAMAGE;

D O I：

10.1016/j.compstruct.2015.12.053

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

High pressure vessels with winding lamination of [90 degrees/+/- 15 degrees] were manufactured adopting a vinylester and an epoxy resin reinforced with carbon fibres. An experimental setup was design to test the vessels up to the burst pressure. The tests results demonstrate a higher ultimate pressure of the carbon/vinylester composite vessel with respect to the epoxy reinforced counterpart. The full field strain measurements by the digital image correlation technique show a delayed of the initiation and propagation of the damage in the carbon/vinylester. Moreover, the carbon/vinylester vessel performed more homogeneous strain distribution with less and shorter hoop cracks than the carbon/epoxy one, as observed also with an X-ray micro tomography system, a laser microscope and a scanning electron microscope. (C) 2015 Elsevier Ltd. All rights reserved.

引用

页码：147 / 156

页数：10

共 50 条

[1] Interpenetrating vinylester/epoxy resins reinforced by flax fibre mat
Szabo, JS
Romhany, G
Czigany, T
Karger-Kocsis, J
ADVANCED COMPOSITES LETTERS, 2003, 12 (03) : 115 - 120
[2] STRENGTH DESIGN CRITERIA FOR CARBON EPOXY PRESSURE-VESSELS
SWANSON, SR
JOURNAL OF SPACECRAFT AND ROCKETS, 1990, 27 (05) : 522 - 526
[3] APPLICATION OF CARBON-FIBRE-REINFORCED PLASTICS IN MANUFACTURE OF PRESSURE VESSELS
GALLANT, PE
JONES, MW
PLASTICS & POLYMERS, 1969, 37 (127): : 27 - &
[4] Effect of Thermal Ageing on the Mechanical Strength of Carbon Fibre Reinforced Epoxy Composites
Zavatta, Nicola
Rondina, Francesco
Falaschetti, Maria Pia
Donati, Lorenzo
POLYMERS, 2021, 13 (12)
[5] Uncertainties in flexural strength of carbon/glass fibre reinforced hybrid epoxy composites
Dong, Chensong
COMPOSITES PART B-ENGINEERING, 2016, 98 : 176 - 181
[6] DISCUSSION OF APPLICATION OF CARBON-FIBRE-REINFORCED PLASTICS IN MANUFACTURE OF PRESSURE VESSELS
ROBERTS, F
FITZGERA.LM
COTTRELL, CL
MCMULLEN, P
GLEESON, B
WELLS, H
SIDEY, GR
SMITH, JW
GALLANT, PE
PLASTICS & POLYMERS, 1969, 37 (127): : 30 - &
[7] High performance carbon fibre reinforced epoxy composites with controllable stiffness
Maples, Henry A.
Wakefield, Steven
Robinson, Paul
Bismarck, Alexander
COMPOSITES SCIENCE AND TECHNOLOGY, 2014, 105 : 134 - 143
[8] Modelling of the transverse strength of fibre reinforced epoxy composite at low and high temperature
Fiedler, B
Gagel, A
Hobbiebrunken, T
Schulte, K
Hojo, M
Ochiai, S
COMPOSITE INTERFACES, 2005, 12 (3-4) : 379 - 394
[9] Interlaminar shear strength of carbon fibre reinforced epoxy composite under the influence of environments
Zhang, M
Mason, SE
ADVANCED COMPOSITES LETTERS, 1998, 7 (01) : 27 - 30
[10] Impact fatigue behaviour of carbon fibre-reinforced vinylester resin composites
Rita Roy
B. K. Sarkar
A. K. Rana
N. R. Bose
Bulletin of Materials Science, 2001, 24 : 79 - 86

← 1 2 3 4 5 →