Correlation between mechanical and dielectric properties of Alfa/Wool/Polymeric hybrid fibres reinforced polyester composites

被引:5
|
作者
Triki, A. [1 ]
Omri, M. A. [1 ]
Guicha, M. [2 ]
Ben Hassen, M. [2 ]
Arous, M. [1 ]
Kallel, A. [1 ]
机构
[1] FSS 3018, Lab Mat Composites Polymeres & Ceram, Tunis, Tunisia
[2] Univ Monastir, ISET Ksar Hellal, Lab Genie Textile, Monastir, Tunisia
关键词
RELAXATION;
D O I
10.1088/1757-899X/48/1/012008
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Dielectric measurements and tensile testing of polyester/natural fibres (Alfa/wool) and thermo binder fibres (Pe/Pet) composites were investigated in order to study the adhesion of the fibres in the polyester matrix. Two composites #1 and #2 having 17:1:2 and 17:2:1 as a relative fraction of alfa/wool and thermo binder (Pe/Pet), respectively, have been characterized in this study. The obtained results revealed that the fibres adhesion in the matrix was better in the composite #1 than in the composite #2. Indeed, the analysis of the interfacial or Maxwell-Wagner-Sillars (MWS) polarization intensity, using the Havriliak-Negami model, has shown a lower intensity and the tensile testing exhibited a higher Young modulus in the composite #1. So the thermo binder fibres improve this adhesion.
引用
收藏
页数:11
相关论文
共 50 条
  • [1] Preliminary Study of the Mechanical Properties of Hybrid Fibres Reinforced Unsaturated Polyester Composites
    Tan, Chek Shin
    Chan, Ming Yeng
    Koay, Seong Chun
    JOURNAL OF PHYSICAL SCIENCE, 2021, 32 (03) : 45 - 59
  • [2] Effect of Alfa fiber mechanical separation on dielectric properties of hybrid unsaturated polyester composites
    Omri, Mohamed Amin
    Triki, Asma
    Ben Hassen, Mohamed
    Sanjay, Mavinkere Rangappa
    Arous, Mourad
    Kallel, Ali
    POLYMER COMPOSITES, 2019, 40 (05) : 1774 - 1785
  • [3] Effect of wool fibers on thermal and dielectric properties of Alfa fibers reinforced polyester composite
    Omri, Med Amin
    Triki, A.
    Guicha, M.
    Ben Hassen, Med
    Arous, M.
    Bulou, A.
    MATERIALS CHEMISTRY AND PHYSICS, 2016, 170 : 312 - 318
  • [4] Spectroscopy analyses of hybrid unsaturated polyester composite reinforced by Alfa, wool, and thermo-binder fibres
    Triki, A.
    Dittmer, J.
    Ben Hassen, Med
    Arous, M.
    Bulou, A.
    Gargouri, Med
    POLYMER SCIENCE SERIES A, 2016, 58 (02) : 255 - 264
  • [5] Spectroscopy analyses of hybrid unsaturated polyester composite reinforced by Alfa, wool, and thermo-binder fibres
    A. Triki
    J. Dittmer
    Med Ben Hassen
    M. Arous
    A. Bulou
    Med Gargouri
    Polymer Science Series A, 2016, 58 : 255 - 264
  • [6] Hybrid Polyester Composites Reinforced with Curauá Fibres and Nanoclays
    Gilberto García del Pino
    Antonio Claudio Kieling
    Abderrezak Bezazi
    Haithem Boumediri
    Juliana Fontolan Rolim de Souza
    Francisco Valenzuela Díaz
    Jose Luis Valin Rivera
    Jamile Dehaini
    Tulio Hallak Panzera
    Fibers and Polymers, 2020, 21 : 399 - 406
  • [7] Hybrid Polyester Composites Reinforced with Curaua Fibres and Nanoclays
    Garcia del Pino, Gilberto
    Kieling, Antonio Claudio
    Bezazi, Abderrezak
    Boumediri, Haithem
    Rolim de Souza, Juliana Fontolan
    Valenzuela Diaz, Francisco
    Valin Rivera, Jose Luis
    Dehaini, Jamile
    Panzera, Tulio Hallak
    FIBERS AND POLYMERS, 2020, 21 (02) : 399 - 406
  • [8] Mechanical and thermal properties of chemical treated kenaf fibres reinforced polyester composites
    Khalil, H. P. S. Abdul
    Suraya, N. L.
    Atiqah, N.
    Jawaid, M.
    Hassan, A.
    JOURNAL OF COMPOSITE MATERIALS, 2013, 47 (26) : 3343 - 3350
  • [9] Elaboration and mechanical properties analysis of a composite based on polyester resin reinforced with natural Alfa fibres
    Boukhoulda, A.
    Boukhoulda, F. B.
    Makich, H.
    Nouari, M.
    Haddag, B.
    JOURNAL OF COMPOSITE MATERIALS, 2019, 53 (28-30) : 3993 - 4001
  • [10] Alfa fibres for unsaturated polyester composites reinforcement: Effects of chemical treatments on mechanical and permeation properties
    Bessadok, A.
    Roudesli, S.
    Marais, S.
    Follain, N.
    Lebrun, L.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2009, 40 (02) : 184 - 195