Discuss the heat release capacity of polymer derived from microscale combustion calorimeter

被引：21
|
作者：
Xu, Qiang [1 ]
Jin, Cong [2 ]
Majlingova, Andrea [3 ]
Restas, Agoston [4 ]
机构：
[1] Nanjing Univ Sci & Technol, Sch Mech Engn, Nanjing 210014, Jiangsu, Peoples R China
[2] Nanjing Univ Sci & Technol, Sch Comp Sci & Technol, Nanjing 210014, Jiangsu, Peoples R China
[3] Tech Univ Zvolen, Fac Wood Sci & Technol, Zvolen 96053, Slovakia
[4] Natl Univ Publ Serv, Dept Fire Prevent & Rescue Control, H-1101 Budapest, Hungary
来源：
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY | 2018年 / 133卷 / 01期
关键词：
Heat release capacity; Flammability; Heating rate; Microscale combustion calorimeter; Limited oxygen index; FLAMMABILITY;
D O I：
10.1007/s10973-017-6866-3
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
Heat release capacity is known as a combination of the thermal stability and combustion properties, which can be used to classify the flammability of materials. It can be derived from microscale combustion calorimeter test results or from additive molar group contributions. PMMA and two kinds of extruded polystyrene were tests by microscale combustion calorimeter with 9 heating rates. Heat release capacity was calculated for the tested materials by 5 algorithms from the literatures. Adaptability of these 5 algorithms was evaluated in this paper.
引用
收藏
页码：649 / 657
页数：9
相关论文
共 50 条
  • [1] Discuss the heat release capacity of polymer derived from microscale combustion calorimeter
    Qiang Xu
    Cong Jin
    Andrea Majlingova
    Agoston Restas
    Journal of Thermal Analysis and Calorimetry, 2018, 133 : 649 - 657
  • [2] DIFFERENTIAL HEAT CAPACITY CALORIMETER FOR POLYMER TRANSITION STUDIES
    GILL, SJ
    BECK, K
    REVIEW OF SCIENTIFIC INSTRUMENTS, 1965, 36 (03): : 274 - &
  • [3] HEAT TRANSFER AND COMBUSTION PROCESSES IN THE OSU CALORIMETER FOR RATE OF HEAT RELEASE PREDICTIONS
    Cappello, Garrett
    Farouk, Bakhtier
    PROCEEDINGS OF ASME 2023 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, IMECE2023, VOL 10, 2023,
  • [4] Accuracy of Heat-Release Rate Measured in Microscale Combustion Calorimetry
    Guo, H.
    Lyon, R. E.
    Safronava, N.
    JOURNAL OF TESTING AND EVALUATION, 2018, 46 (03) : 1090 - 1098
  • [5] PULSATING FLOW DERIVED BY COMBUSTION HEAT RELEASE
    CELIK, I
    WANG, YZ
    INTERNATIONAL JOURNAL OF ENGINEERING FLUID MECHANICS, 1990, 3 (03): : 269 - 291
  • [6] Heat release rates of modern residential furnishings during combustion in a room calorimeter
    Bwalya, Alex
    Gibbs, Eric
    Lougheed, Gary
    Kashef, Ahmed
    FIRE AND MATERIALS, 2015, 39 (08) : 685 - 716
  • [7] Textile heat release properties measured by microscale combustion calorimetry: Experimental repeatability
    Yang, Charles Q.
    He, Qingliang
    FIRE AND MATERIALS, 2012, 36 (02) : 127 - 137
  • [8] A stirred water calorimeter for measuring heat flux from smoldering combustion
    Schneller, MC
    Frandsen, WH
    INTERNATIONAL JOURNAL OF WILDLAND FIRE, 1998, 8 (03) : 129 - 135
  • [9] Pyrolysis and combustion of polymer mixtures: Exploring additivity of the heat release rate
    Snegirev, A. Yu.
    Handawy, M. Koraiem
    Stepanov, V. V.
    Talalov, V. A.
    POLYMER DEGRADATION AND STABILITY, 2019, 161 : 245 - 259
  • [10] Measurements of heat release from upholstery materials using the cone calorimeter
    CreyF, H
    Hurd, R
    King, DA
    CELLULAR POLYMERS, 1995, 14 (02) : 118 - 156
12345