Application of integrated scatterometry measurements for a wafer-level litho feed-back loop in a high-volume 300mm DRAM production environment

With critical dimensions in microelectronics devices shrinking to 70nm and below, CD metrology is becoming more and more critical, and additional measurement information will be needed, especially for sidewall profiles and profile height. Integrated scatterometry is, on the one hand, giving the needed measurement precision, and on the other hand, it enables more measurements than stand-alone metrology. Both high precision and large sampling are needed for future technology nodes. This paper shows results from several full volume DRAM applications of state-of-the-art technology nodes on 300 min wafers. These applications include critical line/space (L/S) layers as 2D applications and contact-hole (CH) layers consisting of elliptical CH-like structures as critical 3D applications. The selected applications are significantly more challenging with respect to scatterometry model generation than the applications presented in previous papers [1, 2]. Simultaneously, they belong to the most critical lithography steps in DRAM manufacturing. In the experiments, the influences of both pre-processes and the litho cluster on Critical Dimension Uniformity (CDU) have been investigated. Possible impacts on Run-to-Run systems like Feed-back and Feed-forward loops will also be discussed. We show that using integrated scatterometry can significantly increase the productivity of lithography clusters.