Tough ceramics by microwave sintering of nanocrystalline titanium diboride ceramics

被引：57
|
作者：
Demirskyi, D. [1 ,2 ,3 ]
Agrawal, D. [2 ]
Raguya, A. [3 ]
机构：
[1] Natl Inst Mat Sci, Tsukuba, Ibaraki 3050047, Japan
[2] Penn State Univ, Mat Res Inst, University Pk, PA 10802 USA
[3] Frantsevich Inst Problems Mat Sci, UA-03680 Kiev, Ukraine
来源：
CERAMICS INTERNATIONAL | 2014年 / 40卷 / 01期
关键词：
Sintering; Microwave heating; Ceramics; TiB2; TiN; MECHANICAL-PROPERTIES; DENSIFICATION KINETICS; SILICON-NITRIDE; SINGLE-MODE; GRAIN-SIZE; DIFFUSION; ZIRCONIA; TIB2; EVOLUTION; GROWTH;
D O I：
10.1016/j.ceramint.2013.07.010
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Dense composites of TiB2 with additions of TiN have been produced by microwave sintering. Microwave sintering was conducted at 1200-1700 degrees C under controlled atmosphere. The effects of composition, sintering temperature, on densification, microstructure, and mechanical properties were investigated. Microwave sintering resulted in uniform crack-free uniforrn microstructure, as well as maximum relative density of 99% and bending strength of 368 +/- 15 MPa, Young's modulus of 440 +/- 11 GPa, electric resistivity of 2 x 10(-5) Omega cm, Vickers hardness of 26.2 +/- 0.4 GPa, and a fracture toughness of 6.2 +/- 0.34 MPa.m(1/2) were obtained using 36 wt% TiB2, and sintering for 10 min at 1650 degrees C. (C) 2013 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
引用
收藏
页码：1303 / 1310
页数：8
相关论文
共 50 条
  • [1] MICROWAVE SINTERING OF TITANIUM DIBORIDE
    HOLCOMBE, CE
    DYKES, NL
    JOURNAL OF MATERIALS SCIENCE, 1991, 26 (14) : 3730 - 3738
  • [2] Sintering and strength of hot-pressed ceramics based on titanium diboride
    Koval'chenko, M. S.
    Ochkas, L. F.
    Litvin, R. V.
    Yurchenko, D. Z.
    Britun, V. F.
    POWDER METALLURGY AND METAL CERAMICS, 2007, 46 (9-10) : 436 - 441
  • [3] Pressureless sintering and properties of titanium diboride ceramics containing chromium and iron
    Kang, SH
    Kim, DJ
    Kang, ES
    Baek, SS
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2001, 84 (04) : 893 - 895
  • [4] Sintering and strength of hot-pressed ceramics based on titanium diboride
    M. S. Koval’chenko
    L. F. Ochkas
    R. V. Litvin
    D. Z. Yurchenko
    V. F. Britun
    Powder Metallurgy and Metal Ceramics, 2007, 46 : 436 - 441
  • [5] MICROWAVE SINTERING OF CERAMICS
    SWAIN, B
    ADVANCED MATERIALS & PROCESSES, 1988, 134 (03): : 76 - 82
  • [6] MICROWAVE SINTERING OF CERAMICS
    KATZ, JD
    ANNUAL REVIEW OF MATERIALS SCIENCE, 1992, 22 : 153 - 170
  • [7] MICROWAVE SINTERING OF CERAMICS
    ROBERTSON, N
    BUMGARNER, JW
    BRODWIN, MR
    JOHNSON, DL
    AMERICAN CERAMIC SOCIETY BULLETIN, 1980, 59 (08): : 837 - 837
  • [8] Analysis of pressureless sintering of titanium diboride ceramics with nickel, cobalt, and tungsten carbide additives
    Telle, Rainer
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2019, 39 (07) : 2266 - 2276
  • [9] Preparation of titanium diboride reticulated porous ceramics
    Han Shaowei
    Wang Weiming
    Fu zhengyi
    Wang Hao
    HIGH-PERFORMANCE CERAMICS V, PTS 1 AND 2, 2008, 368-372 : 964 - 966
  • [10] Titanium diboride ceramics for solar thermal absorbers
    Sani, Elisa
    Meucci, Marco
    Mercatelli, Luca
    Balbo, Andrea
    Musa, Clara
    Licheri, Roberta
    Orru, Roberto
    Cao, Giacomo
    SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2017, 169 : 313 - 319
12345