Diffusion Behavior of Zn During Reflow of Sn-9Zn Solder on Ni/Cu Substrate

被引：12
|
作者：
Mittal, Jagjiwan [1 ]
Kuo, Shih-Ming [1 ]
Lin, Yu-Wei [1 ]
Lin, Kwang-Lung [1 ]
机构：
[1] Natl Cheng Kung Univ, Dept Mat Sci & Engn, Tainan 70101, Taiwan
来源：
JOURNAL OF ELECTRONIC MATERIALS | 2009年 / 38卷 / 12期
关键词：
Lead-free solders; Sn-Zn alloy; diffusion; EPMA; EDX; SN-ZN; INTERMETALLIC COMPOUNDS; INTERFACIAL REACTIONS; JOINT RELIABILITY; NI; CU; GROWTH; LAYER; AU/NI/CU; TIN;
D O I：
10.1007/s11664-009-0941-x
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
Reflow behavior of Sn-Zn solder on Ni/Cu substrate was investigated in an infrared (IR) reflow furnace using different heating rates from 180 degrees C/min to 36 degrees C/min. Energy dispersive spectroscopy (EDX) studies of the reflowed samples showed increased diffusion of Zn from the solder to the intermetallic compound (IMC) layer with a decrease in heating rate. Higher interfacial activity and affinity of the Zn in the formation of the IMC with the lowering of the heating rate were further demonstrated by electron probe microanalyzer (EPMA) results. The Zn diffusion behavior was related to its higher reactivity and smaller size in comparison with Sn, phase separation during heating, and affinity of Zn to form Ni-Sn-Zn and Ni-Zn intermetallic compounds.
引用
收藏
页码：2436 / 2442
页数：7
相关论文
共 50 条
  • [1] Diffusion Behavior of Zn During Reflow of Sn-9Zn Solder on Ni/Cu Substrate
    Jagjiwan Mittal
    Shih-Ming Kuo
    Yu-Wei Lin
    Kwang-Lung Lin
    Journal of Electronic Materials, 2009, 38 : 2436 - 2442
  • [2] Zn diffusion and reflow behaviour of Sn-9Zn and Sn-8.5Zn-03Ag-0.01Al-0.1Ga solders on a Ni/Cu substrate under IR reflow
    Mittal, J.
    Lin, K. L.
    SOLDERING & SURFACE MOUNT TECHNOLOGY, 2014, 26 (02) : 87 - 95
  • [3] Interfacial growth behavior of Sn-9Zn/additive Cu-particles and Sn-9Zn/Cu-substrate
    College of Mechanical Engineering, South China University of Technology, Guangzhou 510641, China
    不详
    Zhongguo Youse Jinshu Xuebao, 2007, 7 (1083-1089):
  • [4] Electromigration of Sn-9Zn solder in contact with Cu
    Lin, KL
    Fang, YH
    9TH INTERNATIONAL SYMPOSIUM ON ADVANCED PACKAGING MATERIALS: PROCESSES, PROPERTIES AND INTERFACES, 2004 PROCEEDINGS, 2004, : 17 - 20
  • [5] Different diffusion behavior of Cu, Ni and Zn atoms in Cu/Sn-9Zn/Ni interconnects during Liquid-Solid electromigration
    Zhou, Q.
    Zhou, Y.
    Qin, X.
    Wang, X. J.
    Huang, M. L.
    2014 15TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2014, : 1164 - 1168
  • [6] Effect of Electromigration on Interfacial Reaction in Cu/Sn-9Zn/Cu and Cu/Sn-9Zn/Ni Interconnects
    Zhou, Q.
    Li, Q.
    Zhou, Y.
    Wang, X. J.
    Huang, M. L.
    2016 17TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2016, : 473 - 476
  • [7] Interfacial reactions and joint reliability of Sn-9Zn solder on Cu or electrolytic Au/Ni/Cu BGA substrate
    Lee, CY
    Yoon, JW
    Kim, YJ
    Jung, SB
    MICROELECTRONIC ENGINEERING, 2005, 82 (3-4) : 561 - 568
  • [8] Microstructure evolution during electromigration between Sn-9Zn solder and Cu
    Kuo S.-M.
    Lin K.-L.
    Journal of Materials Research, 2007, 22 (05) : 1240 - 1249
  • [9] Interfacial reaction of Sn-9Zn/Cu joint with Cu particle-rein forced composite solder Sn-9Zn
    School of Mechanical Engineering, South China University of Technology, Guangzhou 510640, China
    不详
    Hanjie Xuebao, 2007, 5 (105-108):
  • [10] Effect of reflow time on shear property of Sn-9Zn solder bumps
    Sun, Menglong
    Zhao, Qinghua
    Wang, Dongfan
    Hu, Anmin
    Li, Ming
    2017 18TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2017, : 1035 - 1038
12345