CORROSION BEHAVIORS OF ND: YAG LASER-GMA HYBRID WELDMENT OF AA5052-H32 Al ALLOYS

被引:1
|
作者
Zhang, Da-Quan [2 ]
Park, Young Woo [1 ]
Lee, Kang Yong [1 ]
机构
[1] Yonsei Univ, Stress Anal & Failure Design Lab, Sch Mech Engn, Seoul 120749, South Korea
[2] Shanghai Univ Elect Power, Dept Environm Engn, Shanghai 200090, Peoples R China
关键词
Aluminum alloy; laser hybrid welding; corrosion and oxidation; microstructure; ALUMINUM-ALLOYS; PITTING CORROSION;
D O I
10.1142/S0218625X09012275
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
This paper investigated the corrosion behaviors of the Nd: YAG laser-gas metal arc (GMA) AA5052-H32 weldments comparing with the base alloy. The corrosion susceptibility of weldments was higher than that of the base alloy. The weld fusion zone (WFZ) suffered the severe pitting in acidic chloride media. The zones adjacent to the weld fusion boundary showed less corrosion tendency. A corrosion cracking was associated with pitting in the weldments. The surface morphology observation and composition analysis were investigated by the scanning electron microscopy (SEM) with energy dispersive X-ray (EDX) spectroscopy. At the WFZ/HAZ interface and the HAZ/base alloy interface, the galvanic corrosion coupling existed. From the comparison, the WFZ showed anodic behavior, the zone adjacent to the weld fusion boundary showed cathodic behavior. The corrosion of WFZ was progressed by the formation of the galvanic couples.
引用
收藏
页码:43 / 47
页数:5
相关论文
共 24 条
  • [1] Corrosion properties of Nd:YAG laser-GMA hybrid welded AA6061 Al alloy and its microstructure
    Zhang, Da-Quan
    Li, Jin
    Joo, Hyung Goun
    Lee, Kang Yong
    CORROSION SCIENCE, 2009, 51 (06) : 1399 - 1404
  • [2] Investigation of mechanical and metallurgical behaviour in FSW of AA5052-H32 and AA5083-H111 aluminium alloys
    Crushan, R.
    Varthanan, P. Ashoka
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2021, 22 (06): : 620 - 628
  • [3] Experimental and Numerical Investigation of AA5052-H32 Al Alloy with U-Profile in Cold Roll Forming
    Murugesan, Mohanraj
    Sajjad, Muhammad
    Jung, Dong Won
    MATERIALS, 2021, 14 (02) : 1 - 19
  • [4] Optimization of process parameters in friction stir welding of dissimilar aluminum alloys (AA6061-T6 and AA5052-H32)
    Heramo, Wondu Tesfaye
    Workneh, Henok Zewdu
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 129 (9-10): : 4473 - 4489
  • [5] Mechanical properties and metallurgical characterization of FSPed TIG and TIG welded AA5052-H32/AA5083-H111 dissimilar aluminium alloys
    Dhanaraj, Antony Prabu
    Kumarasamy, Subbaiah
    METALLURGICAL RESEARCH & TECHNOLOGY, 2021, 118 (03)
  • [6] Tool Pin Profile Studies on Friction Stir Welded Joints of AA5052-H32 and AA6061-T6 Aluminum Alloys
    Balamurugan, S.
    Subbaiah, K.
    ADVANCES IN MANUFACTURING PROCESSES, ICEMMM 2018, 2019, : 663 - 670
  • [7] Mechanical, Microstructural and Sliding Wear Properties of Friction Stir Welded AA6063-T6 and AA5052-H32 Aluminium Alloys
    Patel, Vinay Kumar
    Kumar, Pradyumn
    Bhattacharya, Shantanu
    MATERIALS FOCUS, 2018, 7 (01) : 50 - 58
  • [8] Effect of Tool Rotation Speed on Friction Stir Spot Welded AA5052-H32 and AA6082-T6 Dissimilar Aluminum Alloys
    Patel V.V.
    Sejani D.J.
    Patel N.J.
    Vora J.J.
    Gadhvi B.J.
    Padodara N.R.
    Vamja C.D.
    Metallography, Microstructure, and Analysis, 2016, 5 (2) : 142 - 148
  • [9] Superficial metal matrix composite of AA5052-H32/Al2O3 manufactured by friction stir processing
    Zuluaga-Posada, Maria
    Hoyos-Pulgarin, Elizabeth
    Montoya-Goez, Yesid
    Maria Lopez-Ochoa, Diana
    UIS INGENIERIAS, 2019, 18 (03): : 27 - 32
  • [10] Microstructure and mechanical properties on friction stir processed TIG welded dissimilar joints of AA5052-H32 and AA5083-H111 alloys by grey approach
    Chanakyan, Chandrasekaran
    Prabu, Dhanaraj Antony
    Alagarsamy, Sivasamy
    Charles, Mark Martin
    REVISTA DE METALURGIA, 2022, 58 (04)