Electrochemical behavior of redox species at carbon fibre microdisk array electrode modified with mixed-valent molybdenum(VI, V) oxide

被引:13
|
作者
Liu, SQ [1 ]
Wang, BX [1 ]
Liu, BF [1 ]
Dong, SJ [1 ]
机构
[1] Chinese Acad Sci, Changchun Inst Appl Chem, Electroanalyt Chem Lab, Changchun 130022, Peoples R China
关键词
mixed-valent molybdenum oxide; chemically modified electrode; cyclic voltammogram; microelectrode; redox species;
D O I
10.1016/S0013-4686(99)00324-2
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
In this study, electrode responses to a large number of electroactive species with different standard potentials at the molybdenum oxide-modified carbon fibre microdisk array (CFMA) electrode were investigated. The results demonstrated that the electrochemical behavior for those redox species with formal potentials more positive than similar to 0.0 V at the molybdenum oxide-modified CFMA electrode were affected by the range and direction of the potential scan, which were different from that at a bare CFMA electrode. If the lower limit of the potential scan was more positive than the reduction potential of the molybdenum oxide film, neither the oxidation nor the reduction peaks of the redox species tested could be observed. This indicates that electron transfer between the molybdenum oxide film on the electrode and the electroactive species in solution is blocked due to the existence of a high resistance between the film and electrolyte in these potential ranges. If the lower limit of the potential scan was more negative than the reduction potential of the molybdenum oxide film (similar to - 0.6 V), the oxidation peaks of these species occurred at the potentials near their formal potentials. In addition, the electrochemical behavior of these redox species at the molybdenum oxide-modified CFMA electrode showed a diffusionless electron transfer process. On the other hand, the redox species with formal potentials more negative than similar to - 0.2 V showed similar reversible voltammetric behaviors at both the molybdenum oxide-modified CFMA electrode and the bare electrode. This can be explained by the structure changes of the film before and after reduction of the film. In addition we also observed that the peak currents of some redox species at the modified electrode were much larger than those at a bare electrode under the same conditions, which has been explained by the interaction between these redox species and the reduction state of the molybdenum oxide film. (C) 2000 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:1683 / 1690
页数:8
相关论文
共 34 条
  • [1] Electrochemical deposition and behavior of mixed-valent molybdenum oxide film at glassy carbon and ITO electrodes
    Kocak, Suleyman
    Ertas, Fatma Nil
    Dursun, Zekerya
    APPLIED SURFACE SCIENCE, 2013, 265 : 205 - 213
  • [2] ELECTROCHEMICAL PREPARATION OF MICROELECTRODES MODIFIED WITH NONSTOICHIOMETRIC MIXED-VALENT MOLYBDENUM OXIDES
    DONG, SJ
    WANG, BX
    JOURNAL OF ELECTROANALYTICAL CHEMISTRY, 1994, 370 (1-2): : 141 - 143
  • [3] ELECTROCHEMICAL PREPARATION OF ELECTRODES MODIFIED WITH NON-STOICHIOMETRIC MIXED-VALENT TUNGSTEN(VI, V) OXIDES
    KULESZA, PJ
    FAULKNER, LR
    JOURNAL OF ELECTROANALYTICAL CHEMISTRY, 1988, 248 (02): : 305 - 320
  • [4] Intrinsic Semiconducting Behavior in a Large Mixed-Valent Uranium(V/VI) Cluster
    Zhang, Mingxing
    Liang, Chengyu
    Cheng, Guo-Dong
    Chen, Junchang
    Wang, Yumin
    He, Linwei
    Cheng, Liwei
    Gong, Shicheng
    Zhang, Duo
    Li, Jiong
    Hu, Shu-Xian
    Juan, Diwu
    Wu, Guozhong
    Wang, Yaxing
    Chai, Zhifang
    Wang, Shuao
    ANGEWANDTE CHEMIE-INTERNATIONAL EDITION, 2021, 60 (18) : 9886 - 9890
  • [5] Electrochemical preparation of microelectrodes modified with non-stoichiometric mixed-valent molybdenum oxides
    Wang, BX
    Hu, G
    Liu, BF
    Dong, SJ
    ACTA CHIMICA SINICA, 1996, 54 (06) : 598 - 604
  • [6] Preparation and characterization of mixed-valent titanium hexacyanoferrate film modified glassy carbon electrode
    Jiang, Mian
    Zhao, Zaofan
    1600, (292): : 1 - 2
  • [7] PREPARATION AND CHARACTERIZATION OF MIXED-VALENT TITANIUM HEXACYANOFERRATE FILM MODIFIED GLASSY-CARBON ELECTRODE
    JIANG, M
    ZHOU, XY
    ZHAO, ZF
    JOURNAL OF ELECTROANALYTICAL CHEMISTRY, 1990, 292 (1-2): : 289 - 296
  • [8] Fabrication of amorphous mixed-valent molybdenum oxide film electrodepo sited on a glassy carbon electrode and its application as a electrochemistry sensor of iodate
    Tian, L
    Liu, L
    Chen, L
    Lu, N
    Xu, HD
    SENSORS AND ACTUATORS B-CHEMICAL, 2005, 105 (02): : 484 - 489
  • [9] Electrocatalytic tetracycline oxidation at a mixed-valent ruthenium oxide-ruthenium cyanide-modified glassy carbon electrode and determination of tetracyclines by liquid chromatography with electrochemical detection
    Loetanantawong, B
    Suracheep, C
    Somasundrum, M
    Surareungchai, W
    ANALYTICAL CHEMISTRY, 2004, 76 (08) : 2266 - 2272
  • [10] ISOVALENT AND MIXED-VALENT DINUCLEAR MU-OXO AND MU-OXO MU-DISULFIDO COMPLEXES OF MOLYBDENUM(V) AND MOLYBDENUM(VI)
    XIAO, ZG
    ENEMARK, JH
    WEDD, AG
    YOUNG, CG
    INORGANIC CHEMISTRY, 1994, 33 (16) : 3438 - 3441