Role of Tool Shoulder Diameter in Friction Stir Welding: An Analysis of the Temperature and Plastic Deformation of AA 2014 Aluminium Alloy

被引：30
|
作者：
Ramanjaneyulu, K. [1 ]
Reddy, G. Madhusudhan [2 ]
Rao, A. Venugopal [2 ]
机构：
[1] Mahatma Gandhi Inst Technol, Hyderabad, Andhra Pradesh, India
[2] Def Met Res Lab, Hyderabad 500258, Andhra Pradesh, India
来源：
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2014年 / 67卷 / 05期
关键词：
Friction stir welding; Aluminium alloy; Tool shoulder diameter; Zener-Hollomon parameter; Temperature; Strain-rate; MATERIAL FLOW; PIN PROFILE; MECHANICAL-PROPERTIES; JOINTS; GEOMETRY; STRENGTH; ZONE; MICROSTRUCTURE; VISUALIZATION; BEHAVIOR;
D O I：
10.1007/s12666-014-0401-z
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The influence of tool shoulder diameter and its rotational speed on the high temperature plastic deformation of the material during friction stir welding of AA 2014 aluminum alloy is investigated, using the principles of hot working. The soundness of weld and defect formation are analyzed using the Zener-Hollomon parameter 'Z' to describe the high temperature plastic deformation behaviour of material, under the simultaneous influence of temperature and strain-rate. The observed hot deformation behaviour is correlated with the deformation processing map for the first time. At a given rotational speed, the volume of shoulder driven flow reduces with increasing shoulder diameter.
引用
收藏
页码：769 / 780
页数：12
相关论文
共 50 条
  • [1] Role of Tool Shoulder Diameter in Friction Stir Welding: An Analysis of the Temperature and Plastic Deformation of AA 2014 Aluminium Alloy
    K. Ramanjaneyulu
    G. Madhusudhan Reddy
    A. Venugopal Rao
    Transactions of the Indian Institute of Metals, 2014, 67 : 769 - 780
  • [2] Simulation on the temperature field of bobbin tool friction stir welding of AA 2014 aluminium alloy
    Liu, X. M.
    Yao, J. S.
    Cai, Y.
    Meng, H.
    Zou, Z. D.
    ADVANCES IN MECHATRONICS AND CONTROL ENGINEERING II, PTS 1-3, 2013, 433-435 : 2091 - +
  • [3] Experimental Investigation of Tool Geometry on Mechanical Properties of Friction Stir Welding of AA 2014 Aluminium Alloy
    Ugender, S.
    Kumar, A.
    Reddy, A. Somi
    INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2014), 2014, 5 : 824 - 831
  • [4] Effect of shoulder diameter on bobbin tool friction stir welding of AA 6061-T6 alloy
    Fuse, Kishan
    Badheka, Vishvesh
    MATERIALS TODAY-PROCEEDINGS, 2021, 42 : 810 - 815
  • [5] Influence of Shoulder Geometry and Coating of the Tool on the Friction Stir Welding of Aluminium Alloy Plates
    Casalino, Giuseppe
    Campanelli, Sabina
    Mortello, Michelangelo
    24TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2013, 2014, 69 : 1541 - 1548
  • [6] Influences of tool pin profile and tool shoulder diameter on the formation of friction stir processing zone in AA6061 aluminium alloy
    Elangovan, K.
    Balasubramanian, V.
    MATERIALS & DESIGN, 2008, 29 (02) : 362 - 373
  • [7] Tool Geometry for Friction Stir Welding—Optimum Shoulder Diameter
    M. Mehta
    A. Arora
    A. De
    T. DebRoy
    Metallurgical and Materials Transactions A, 2011, 42 : 2716 - 2722
  • [8] Toward optimum friction stir welding tool shoulder diameter
    Arora, A.
    De, A.
    DebRoy, T.
    SCRIPTA MATERIALIA, 2011, 64 (01) : 9 - 12
  • [9] Influences of Tool Pin Profile and Tool Shoulder Curvature on The Formation of Friction Stir Welding Zone in AA6061 Aluminium Alloy
    Moosabeiki, Vahid
    Azimi, Ghasem
    Ghayoor, Mostafa
    MATERIALS AND MANUFACTURING TECHNOLOGIES XIV, 2012, 445 : 789 - +
  • [10] Heat generation, plastic deformation and residual stresses in friction stir welding of aluminium alloy
    Salih, Omar S.
    Ou, Hengan
    Sun, Wei
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2023, 238
12345