Thermodynamic analysis on the process of regasification of LNG and its application in the cold warehouse

被引:30
|
作者
Li, Shuo [1 ,2 ]
Wang, Bin [1 ]
Dong, Jiankai [1 ]
Jiang, Yiqiang [1 ]
机构
[1] Harbin Inst Technol, Dept Bldg Thermal Energy Engn, Harbin, Peoples R China
[2] Univ Alberta, Dept Mech Engn, Edmonton, AB, Canada
关键词
LNG; Regasification; Cold warehouse; Thermodynamic analysis;
D O I
10.1016/j.tsep.2017.08.001
中图分类号
O414.1 [热力学];
学科分类号
摘要
Recently, with the rapid development of LNG (liquefied natural gas) industry, the utilization of LNG cold energy is becoming increasingly important because of the huge amount of energy released in the regasification process. LNGCW (LNG cold warehouse) system, as a common by-product of LNG, is often used with the benefit of energy saving. De facto, few comprehensive and quantitative researches on the LNGCW system are seen in open literature, thus it is necessary to analyze and evaluate the thermal performance of LNGCW system in depth. In this paper, some important results of regasification under different pressures were revealed, including LNG cold energy released, LNG cold exergy released and UA value of LNGHX (LNG heat exchanger). Secondly, a three-stage parallel LNGCW system was proposed and R23 was selected as the intermediate working fluid for this system. When the regasification pressure is 7.0 MPa, thermodynamic analysis showed that the LNGCW system exergy efficiency was 64.75%, and the COP was 1.41. Moreover, both the COP and exergy efficiency of the LNGCW system rose as the LNG regasification pressure increased. Finally, a qualitative analysis showed that LNGCW system as the subsequent stages was more favorable. (C) 2017 Published by Elsevier Ltd.
引用
收藏
页码:1 / 10
页数:10
相关论文
共 50 条
  • [1] Thermodynamic analysis of integrated LNG regasification process configurations
    Mehrpooya, Mehdi
    Sharifzadeh, Mohammad Mehdi Moftakhari
    Katooli, Mohammad H.
    PROGRESS IN ENERGY AND COMBUSTION SCIENCE, 2018, 69 : 1 - 27
  • [2] Thermodynamic analysis of cold energy recovery from LNG regasification
    Zonfrilli, M.
    Facchino, M.
    Serinelli, R.
    Chesti, M.
    De Falco, M.
    Capocelli, M.
    JOURNAL OF CLEANER PRODUCTION, 2023, 420
  • [3] Thermodynamic analysis of combined cycle power plant using regasification cold energy from LNG terminal
    Pattanayak, Lalatendu
    Padhi, Biranchi Narayana
    ENERGY, 2018, 164 : 1 - 9
  • [4] Utilization of Cold Energy from LNG Regasification Process: A Review of Current Trends
    Akashah, Muhammad Haziq Noor
    Rozali, Nor Erniza Mohammad
    Mahadzir, Shuhaimi
    Liew, Peng Yen
    PROCESSES, 2023, 11 (02)
  • [5] Analysis of LNG cold energy utilization and regasification process for a gas turbine power plant integrated with a novel polygeneration process
    Chen, Feng
    Zhang, Wei
    Xuan, Jiamin
    Cai, Jie
    Zhang, Hongbin
    APPLIED THERMAL ENGINEERING, 2025, 258
  • [6] Exergoeconomic analysis applied to the process of regasification of LNG integrated into an air separation process
    Tesch, Stefanie
    Morosuk, Tatiana
    Tsatsaronis, George
    ECOS 2016 - Proceedings of the 29th International Conference on Efficiency, Cost, Optimisation, Simulation and Environmental Impact of Energy Systems, 2016,
  • [7] Cold recovery during regasification of LNG part one: Cold utilization far from the regasification facility
    La Rocca, Vincenzo
    ENERGY, 2010, 35 (05) : 2049 - 2058
  • [8] A POINT OF VIEW ON THE IMPROVEMENT OF THE LNG REGASIFICATION PROCESS
    Memet, Feiza
    Mitu, Daniela Elena
    2011 INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND TECHNOLOGY (ICMET 2011), 2011, : 69 - 72
  • [9] Performance analysis of a CCGT power plant integrated to a LNG regasification process
    Stradioto, Diogo Angelo
    Seelig, Marina Fonseca
    Schneider, Paulo Smith
    JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING, 2015, 23 : 112 - 117
  • [10] Thermodynamic assessment of integrated heat recovery system combining exhaust-gas heat and cold energy for LNG regasification process in FSRU vessel
    Lee, Sangick
    Choi, Byung Chul
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2016, 30 (03) : 1389 - 1398