Automated design for the runner system of injection molds based on packing simulation

Multiple injection cavities are automatically balanced by adjusting runner and gate sizes based on an iterative redesign methodology integrated with computer-aided engineering (CAE) packing simulation. For runner balancing, each cavity must be filled simultaneously at uniform pressure. In addition, the time-pressure history of the polymer melt over the entire molding cycle should be considered. Based on the proposed methodology, a multicavity mold with identical cavities is balanced to minimize entrance pressure differences among various cavities at discrete time steps of the molding cycle. The results have shown more than a 95% reduction of the entrance pressure differences over other related studies, and also have demonstrated increased searching performance over other optimization techniques. A family mold with different cavity volumes and geometries is also balanced to minimize pressure differences at the end of the melt flow path in each cavity on a basis of discrete time steps of the molding cycle. The methodology has shown uniform pressure distributions among the cavities during the entire molding cycle.