Short and long crack growth behavior of welded ferritic stainless steel

被引：2
|
作者：
Abecassis, Manon [1 ]
Koster, Alain [1 ]
Maurel, Vincent [1 ]
机构：
[1] PSL Res Univ, MAT Ctr Mat, CNRS, MINES ParisTech,UMR 7633, BP 87, F-91003 Evry, France
来源：
21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21) | 2016年 / 2卷
关键词：
Ferritic stainless steel; weldment; crack growth modelling; grain size gradient; JOINT; SOLIDIFICATION; PROPAGATION; RESISTANCE;
D O I：
10.1016/j.prostr.2016.06.438
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
To analyze the influence of welding on fatigue crack growth, several geometrical configurations have been tested using notched specimens with notch located within base metal and welded joint. This methodology has shown that fatigue crack growth rate was similar for base metal and welded part for the ferritic stainless steel F18TNb (corresponding to AISI 441 or EN 1.4509 grades) considering long crack. Whereas for short crack, the microstructure induced by the welding process was evidenced to drastically increase the resulting crack growth rate. The tested configurations have been systematically modeled by finite element analysis to obtain reliable shape function and SIF assessment for the chosen geometries. Then fatigue crack growth behavior is discussed on the basis of both SIF values and the influence of microstructure in crack path and crack growth rate. Copyright (C) 2016 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license.
引用
收藏
页码：3515 / 3522
页数：8
相关论文
共 50 条
  • [1] Fatigue Crack Growth Behavior of AISI 409M Grade Ferritic Stainless Steel Welded Joints Using Austenitic, Ferritic and Duplex Stainless Steel Electrodes
    Lakshminarayanan, A. K.
    Shanmugam, K.
    Balasubramanian, V.
    ISIJ INTERNATIONAL, 2008, 48 (11) : 1640 - 1646
  • [2] Fatigue Crack Growth Behavior of Gas Metal Arc Welded AISI 409 Grade Ferritic Stainless Steel Joints
    Lakshminarayanan, A. K.
    Shanmugam, K.
    Balasubramanian, V.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2009, 18 (07) : 917 - 924
  • [3] Fatigue Crack Growth Behavior of Gas Metal Arc Welded AISI 409 Grade Ferritic Stainless Steel Joints
    A.K. Lakshminarayanan
    K. Shanmugam
    V. Balasubramanian
    Journal of Materials Engineering and Performance, 2009, 18 : 917 - 924
  • [4] Short fatigue crack growth behavior in a ferritic-bainitic steel
    Hussain, K.
    Tauqir, A.
    Hashmi, F.H.
    Khan, A.Q.
    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 1994, 25 A (11): : 2421 - 2425
  • [5] Short crack growth and fatigue life in austenitic-ferritic duplex stainless steel
    Polák, J
    Zezulka, P
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2005, 28 (10) : 923 - 935
  • [6] FATIGUE BEHAVIOR AND SHORT CRACK GROWTH IN FERRITIC-PEARLITIC-BAINITIC STEEL
    Polak, J.
    Petrenec, M.
    ADVANCES IN HETEROGENEOUS MATERIAL MECHANICS 2011, 2011, : 857 - +
  • [7] SHORT FATIGUE-CRACK GROWTH-BEHAVIOR IN A FERRITIC-BAINITIC STEEL
    HUSSAIN, K
    TAUQIR, A
    HASHMI, FH
    KHAN, AQ
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1994, 25 (11): : 2421 - 2425
  • [8] Fatigue crack initiation behavior in embrittled austenitic-ferritic stainless steel
    Sahu, J. K.
    Krupp, U.
    Christ, H. -J.
    INTERNATIONAL JOURNAL OF FATIGUE, 2012, 45 : 8 - 14
  • [9] Short fatigue crack growth behaviour of a ferritic steel weld metal
    Venkateswaran, P
    Raman, SGS
    Pathak, SD
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2005, 10 (01) : 95 - 102
  • [10] Fatigue crack initiation and early growth behavior of ferritic stainless steel in laboratory air and 3%NaCl solution
    Nakajima, Masaki
    Akita, Masayuki
    Tokaji, Keiro
    Shimizu, Toshihiro
    Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 2002, 68 (07): : 1085 - 1091
12345