Experimental measurements of temperatures in ultrasonically assisted drilling of cortical bone

被引：42
|
作者：
Alam, Khurshid [1 ]
Hassan, Edris [1 ]
Bahadur, Issam [1 ]
机构：
[1] Sultan Qaboos Univ, Coll Engn, Dept Mech & Ind Engn, Muscat, Oman
来源：
BIOTECHNOLOGY & BIOTECHNOLOGICAL EQUIPMENT | 2015年 / 29卷 / 04期
关键词：
orthopaedic; bone drilling; ultrasonically assisted drilling; thermocouple; drilling temperature;
D O I：
10.1080/13102818.2015.1034176
中图分类号：
Q81 [生物工程学（生物技术）]; Q93 [微生物学];
学科分类号：
071005 ; 0836 ; 090102 ; 100705 ;
摘要：
Heat generation is a well-known problem in bone drilling. Excessive heat generation during drilling operation on bone causes necrosis of the tissue. This paper presents measurements and analysis of temperatures in ultrasonically assisted drilling of bone. The main objective was to find critical drilling parameters (drill speed and feed rate) and ultrasonic parameters (frequency and amplitude) for producing higher temperatures in bone. The increase in drilling speed and feed rate were found to increase the temperatures in bone. The frequencies above 15 kHz were found to produce higher temperatures in bone. The feed rates above 30 mm/min and the amplitude of vibration up to 20 mu m were found to have no significant effect on bone temperature. Ultrasonically assisted drilling may be used as an alternative to conventional drilling in orthopaedic surgical procedures to avoid death of bone cells.
引用
收藏
页码：753 / 757
页数：5
相关论文
共 50 条
  • [1] Experimental measurements of temperatures in drilling cortical bone using thermocouples
    Alam, K.
    SCIENTIA IRANICA, 2015, 22 (02) : 487 - 492
  • [2] Experimental investigations of forces and torque in conventional and ultrasonically-assisted drilling of cortical bone
    Alam, K.
    Mitrofanov, A. V.
    Silberschmidt, V. V.
    MEDICAL ENGINEERING & PHYSICS, 2011, 33 (02) : 234 - 239
  • [3] Reduction thermal damage to cortical bone using ultrasonically-assisted drilling
    Zheng, Qingchun
    Xia, Lei
    Zhang, Xu
    Zhang, Chunqiu
    Hu, Yahui
    TECHNOLOGY AND HEALTH CARE, 2018, 26 (05) : 843 - 856
  • [4] Surface quality and pullout strength of ultrasonically-assisted drilling cortical bone
    Hu, Yahui
    Fan, Zhenhao
    Zhang, Huaiyu
    Zhang, Chunqiu
    Fu, Weihua
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 2021, 235 (04) : 378 - 388
  • [5] Experimental investigations of drilling temperature of high-energy ultrasonically assisted bone drilling
    Sun, Zhibin
    Wang, Yu
    Xu, Ke
    Zhou, Gang
    Liang, Chendi
    Qu, Junda
    MEDICAL ENGINEERING & PHYSICS, 2019, 65 (1-7) : 1 - 7
  • [6] Analysis of temperature in conventional and ultrasonically-assisted drilling of cortical bone with infrared thermography
    Alam, K.
    Silberschmidt, Vadim V.
    TECHNOLOGY AND HEALTH CARE, 2014, 22 (02) : 243 - 252
  • [7] Machining Parameters Optimization of Ultrasonically-Assisted Drilling Cortical Bone Based on Genetic Algorithm
    Hu, Yahui
    Zhang, Huaiyu
    Wei, Longfei
    Fu, Weihua
    Zhang, Chunqiu
    2019 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS AND AUTOMATION (ICMA), 2019, : 1721 - 1726
  • [8] Experimental Study on the Effect of Point Angle on Force and Temperature in Ultrasonically Assisted Bone Drilling
    Khurshid Alam
    Mojtaba Ghodsi
    Abdullah Al-Shabibi
    Vadim Silberschmidt
    Journal of Medical and Biological Engineering, 2018, 38 : 236 - 243
  • [9] Experimental Study on the Effect of Point Angle on Force and Temperature in Ultrasonically Assisted Bone Drilling
    Alam, Khurshid
    Ghodsi, Mojtaba
    Al-Shabibi, Abdullah
    Silberschmidt, Vadim
    JOURNAL OF MEDICAL AND BIOLOGICAL ENGINEERING, 2018, 38 (02) : 236 - 243
  • [10] Experimental analysis on autoresonant control of ultrasonically assisted drilling
    Li, X.
    Meadows, A.
    Babitsky, V.
    Parkin, R.
    MECHATRONICS, 2015, 29 : 57 - 66
12345