3D Printed Multilayer mm-Wave Dielectric Rod Antenna with Enhanced Gain

被引：0
|
作者：
Lugo, Denise C. [1 ]
Ramirez, Ramiro A. [1 ]
Castro, Juan [1 ]
Wang, Jing [1 ]
Weller, Thomas M. [1 ]
机构：
[1] Univ S Florida, Dept Elect Engn, Tampa, FL 33620 USA
来源：
2017 IEEE INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION & USNC/URSI NATIONAL RADIO SCIENCE MEETING | 2017年
关键词：
Additive Manufacturing; dielectric rod antenna; ceramic composites; millimeter wave; multi-layer; 3-D printing;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
A multilayer dielectric rod antenna (DRA) design is proposed for mm-wave applications. The multilayer DRA is formed by a medium permittivity dielectric rod core encased by a low permittivity cladding to increase the peak gain. The antenna is fabricated using fused deposition modeling (FDM) of two thermoplastics; a ceramic composite material for the core and acrylonitrile butadiene styrene (ABS) for the cladding. The antenna performance is measured from 30 to 40 GHz and the results are validated using numerical simulations. The peak gain of the multilayer antenna is over 22 dBi for the entire frequency range. The effect of the cladding on the antenna performance is to increase the gain by 3-8.5 dB, with a reduction in the half power beamwidth of 22 degrees at the center frequency. The multilayer DRA design offers high gain performance, scalability to other frequency ranges and low-cost fabrication.
引用
收藏
页码：1247 / 1248
页数：2
相关论文
共 50 条
  • [1] Inexpensive 3D Printable High Gain Dielectric Rod Antenna for mm-Wave Applications
    Faisal, Farooq
    Zerfaine, Abdelkader
    Chaker, Mohamed
    Djerafi, Tarek
    2024 IEEE INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION AND INC/USNCURSI RADIO SCIENCE MEETING, AP-S/INC-USNC-URSI 2024, 2024, : 415 - 416
  • [2] A 3D-Printed mm-Wave Deployable Origami Dielectric Reflectarray Antenna
    Cui, Yepu
    Eid, Aline
    Tentzeris, Manos M.
    2020 IEEE INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION AND NORTH AMERICAN RADIO SCIENCE MEETING, 2020, : 1679 - 1680
  • [3] Compact Unibody Dielectric Rod Antenna for mm-wave Communication
    Lin, Hung-Hsuan
    Pu, Ta-Chun
    Chen, Jui-Hung
    Wu, Chun-Yih
    2013 IEEE ANTENNAS AND PROPAGATION SOCIETY INTERNATIONAL SYMPOSIUM (APSURSI), 2013, : 43 - 44
  • [4] A Wideband 3D printed Digital Metasurface Transmitarray Antenna for mm-wave Applications
    Bashir, Gazali
    Singh, Amit K.
    Dubey, Ankit
    2024 18TH EUROPEAN CONFERENCE ON ANTENNAS AND PROPAGATION, EUCAP, 2024,
  • [5] Design of a 3D Printed Antenna for Grid of Beams Applications at mm-wave frequencies
    Ratajczak, Philippe
    2022 16TH EUROPEAN CONFERENCE ON ANTENNAS AND PROPAGATION (EUCAP), 2022,
  • [6] 3D Printed One-shot Deployable Flexible "Kirigami" Dielectric Reflectarray Antenna for mm-Wave Applications
    Cui, Yepu
    Nauroze, Syed Abdullah
    Bahr, Ryan
    Tentzeris, Emmanouil M.
    PROCEEDINGS OF THE 2020 IEEE/MTT-S INTERNATIONAL MICROWAVE SYMPOSIUM (IMS), 2020, : 1164 - 1167
  • [7] 3D Printed Antennas for Mm-wave Sensing Applications
    Vorobyov, A.
    Farserotu, J. R.
    Decotignie, J. -D.
    2017 11TH INTERNATIONAL SYMPOSIUM ON MEDICAL INFORMATION AND COMMUNICATION TECHNOLOGY (ISMICT), 2017, : 23 - 26
  • [8] 3D Printed Wideband Dual-Polarized Lens Antenna for mm-Wave Communication
    Cicchetti, Valentina
    Hao, Yang
    2024 IEEE INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION AND INC/USNCURSI RADIO SCIENCE MEETING, AP-S/INC-USNC-URSI 2024, 2024, : 531 - 532
  • [9] Multibeam dielectric rod antenna for mm-wave wireless power transfer
    Najafabadi, Amir Mohsen Ahmadi
    Ramirez, German A.
    Ghorbanpoor, Mohsen
    Vorobyov, Alexander
    Nussbaum, Pascal
    Skrivervik, Anja
    INTERNATIONAL JOURNAL OF MICROWAVE AND WIRELESS TECHNOLOGIES, 2025,
  • [10] Design of a 3D Printed Luneburg Lens Antenna for Multiple Beams Applications at mm-wave Frequencies
    Ratajczak, Philippe
    2019 13TH EUROPEAN CONFERENCE ON ANTENNAS AND PROPAGATION (EUCAP), 2019,
12345