Deformation analysis of reinforced-core auxetic assemblies by close-range photogrammetry

In this article, we present an experimental study validating the concept of the reinforced-core auxetic assemblies. The main distinctive feature of these assemblies is the presence of a reinforcing core in the microstructural units that increases the shear stiffness and thus produces negative Poisson's ratio. We tested a number of prototypes manufactured using the stereolithography and selective laser sintering methods. To measure the deformations, we employed the close-range photogrammetry method, which enables monitoring of locations of unlimited number of points from digital images. We developed a procedure for multi-point measurement of planar deformations using a single digital camera. This procedure allows for continuous measurement of deformations without interruption to the loading sequence. Camera self-calibration is based on multiple images of stable reference points, which enables high accuracy of the measurements even using a consumer grade digital camera. We compare the obtained experimental results with a simplified continuum model. We demonstrate a good agreement between the theoretical predictions and the experimental results. (C) 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim