Improvement of the Precision of Pipes with the Use of Profiled Pipe Billets

被引：3

作者：

Mikhalkin, D., V ^{[1
]}

Korsakov, A. A. ^{[1
]}

Alyutina, E., V ^{[1
]}

Khramkov, E., V ^{[2
]}

Aleshchenko, A. S. ^{[3
]}

Galkin, S. P. ^{[3
]}

Gamin, Yu, V ^{[3
]}

Bol'nykh, K., V ^{[4
,5
]}

Krivonogov, I. N. ^{[4
,5
]}

机构：

[1] RosNITI JSC, Chelyabinsk, Russia

[2] TMK NTTs LLC, Moscow, Russia

[3] MISiS Natl Res Technol Univ, Moscow, Russia

[4] SinTZ Publ Co, Kamensk Uralskii, Russia

[5] Ural Fed Univ, Kamensk Uralskii, Russia

来源：

METALLURGIST | 2020年 / 64卷 / 3-4期

关键词：

billet profiling; drafting; piercing; hollow billets; zone of deformation; precision; computer simulations; QForm; ALLOY;

D O I：

10.1007/s11015-020-00998-7

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

We propose a technology for the production and piercing profiled pipe billets with an aim to improve the precision of hollow billets and pipes. To obtain profiled billets, it is reasonable to use a three-roll primary mill with specially designed rolls and profiling ridges. Both computer simulations carried out by using the QForm 3D program and the results of experimental rolling carried out at the Chair of Metal Forming of the "MISiS" University reveal an increase in the precision of the wall thickness of the hollow billets.

引用

页码：315 / 321

页数：7

共 50 条

[1] Improvement of the Precision of Pipes with the Use of Profiled Pipe Billets
D. V. Mikhalkin
A. A. Korsakov
E. V. Alyutina
E. V. Khramkov
A. S. Aleshchenko
S. P. Galkin
Yu. V. Gamin
K. V. Bol’nykh
I. N. Krivonogov
Metallurgist, 2020, 64 : 315 - 321
[2] Special aspects of determining parameters for continuous deformation of pipe billets for the specified pipes size range
Fadeev, Victor
Kondrushin, Alexey
MATERIALS TODAY-PROCEEDINGS, 2021, 38 : 1322 - 1325
[3] USE OF HOT-TORSION METHOD TO ASSESS QUALITY OF PIPE BILLETS
TETERIN, PK
TIMOSHUK, LT
KHROMOV, VD
INDUSTRIAL LABORATORY, 1968, 34 (11): : 1638 - &
[4] Liner buckling in profiled polyethylene pipes
Dhar, AS
Moore, ID
GEOSYNTHETICS INTERNATIONAL, 2001, 8 (04) : 303 - 326
[5] Studying the Nonstationary Stages of Screw Rolling of Billets with Profiled Ends
Karpov, B. V.
Skripalenko, M. M.
Galkin, S. P.
Skripalenko, M. N.
Samusev, S. V.
Tran Ba Huy
Pavlov, S. A.
METALLURGIST, 2017, 61 (3-4) : 257 - 264
[6] Simulation of metal flow during upsetting of flat profiled billets
Solomonov, K. N.
Tishchuk, L. I.
Gorbatyuk, S. M.
Devyatiarova, V. V.
Shulgin, A. V.
Belelyubskiy, B. F.
METALLURGIST, 2024, 67 (11-12) : 1769 - 1777
[7] Studying the Nonstationary Stages of Screw Rolling of Billets with Profiled Ends
B. V. Karpov
M. M. Skripalenko
S. P. Galkin
M. N. Skripalenko
S. V. Samusev
Tran Ba Huy
S. A. Pavlov
Metallurgist, 2017, 61 : 257 - 264
[8] Improvement in Billets Weighing Accuracy
Okamoto, Seiji
Takamiya, Yoshinari
Otagaki, Yoshihiro
Isogami, Katsuyuki
AISTECH 2013: PROCEEDINGS OF THE IRON & STEEL TECHNOLOGY CONFERENCE, VOLS I AND II, 2013, : 1859 - 1868
[9] Improvement in technology for rolling the billets
Kuznetsov, I.S.
Yur'ev, A.B.
Bespalov, V.N.
Antonov, V.A.
Kaligin, S.A.
Stal', 2002, (12): : 40 - 41
[10] STUDY ON EXTRUSION OF LARGE PIPES BY USING SMALLER BILLETS
YAMADA, T
MATSUMOTO, Y
JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1982, 46 (10) : 1023 - 1029

← 1 2 3 4 5 →