Fretting wear of SiC and Ni3Al particles reinforced Al alloy matrix composites

被引：7
|
作者：
Chen, Rong [1 ]
Wang, Honghua [1 ]
Zhang, Di [1 ]
Zhang, Guoding [1 ]
机构：
[1] Shanghai Jiao Tong Univ, State Key Lab Met Matrix Composites, Shanghai 200030, Peoples R China
来源：
COMPOSITE MATERIALS V | 2007年 / 351卷
关键词：
fretting wear; wear mechanism; metal matrix composites; adhesive wear; abrasive wear;
D O I：
10.4028/www.scientific.net/KEM.351.75
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
Fretting friction and wear of aluminum alloy, 5 and 10 vol.% SiCp/Al and Ni3Alp/Al composites under 5xI0-4 Pa and atmosphere was investigated. Wear mechanism in vacuum was compared to that in atmosphere at different applied loads. The coefficient of friction (COF) of the SiCp/Al composites was larger than aluminum and Ni3Alp/Al composites, however, incorporation of SiC particles into Al alloy increased the fretting wear resistance of Al alloys, especially in vacuum. It should be notices that the maximum wear depth was larger in vacuum under fretting wear, and the Ni3Alp/Al composites show low fretting wear resistance.
引用
收藏
页码：75 / +
页数：2
相关论文
共 50 条
  • [1] Fretting wear of SiC and Ni3Al particles reinforced Al alloy matrix composites
    State Key Lab. of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai, China
    Key Eng Mat, 2007, (75-80):
  • [2] REINFORCEMENT MATRIX INTERACTION IN SIC FIBER-REINFORCED NI3AL MATRIX COMPOSITES
    YANG, JM
    KAO, WH
    LIU, CT
    HIGH-TEMPERATURE ORDERED INTERMETALLIC ALLOYS III, 1989, 133 : 453 - 458
  • [3] MELT-PROCESSED NI3AL MATRIX COMPOSITES REINFORCED WITH TIC PARTICLES
    SEN, S
    STEFANESCU, DM
    DHINDAW, BK
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1994, 25 (11): : 2525 - 2534
  • [4] Microstructure, Properties and Wear Behaviors of (Ni3Al)p Reinforced Cu Matrix Composites
    Celikyurek, Ibrahim
    Korpe, Nese O.
    Olcer, Tugba
    Gurler, Remzi
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2011, 27 (10) : 937 - 943
  • [5] Microstructure,Properties and Wear Behaviors of （Ni3Al）p Reinforced Cu Matrix Composites
    Ibrahim elikyrek
    Nese .Krpe
    Tugba ler
    Remzi Grler
    JournalofMaterialsScience&Technology, 2011, 27 (10) : 937 - 943
  • [6] Fretting wear of Al-Si alloy matrix composites
    Goto, H
    Uchijo, K
    WEAR, 2004, 256 (06) : 630 - 638
  • [7] Melt processed TiC reinforced Ni3Al matrix composites
    Sen, S.
    Stefanescu, D.M.
    Dhindaw, B.K.
    1993,
  • [8] Dry sliding friction and wear behavior of bronze matrix composites reinforced with Ni3Al particles: Comparison with conventional brake lining
    Celikyurek, Ibrahim
    Bicer, Aytac
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2016, 107 (09) : 835 - 841
  • [9] INTERFACE CHARACTERIZATION OF FIBER-REINFORCED NI3AL MATRIX COMPOSITES
    YANG, JM
    KAO, WH
    LIU, CT
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1989, 20 (11): : 2459 - 2469
  • [10] COMBUSTION SYNTHESIS OF NI3AL AND NI3AL-MATRIX COMPOSITES
    LEBRAT, JP
    VARMA, A
    MILLER, AE
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1992, 23 (01): : 69 - 76
12345