The effect of varying the workpiece diameter on the cutting tool clearance angle in tool-life testing

被引：7
|
作者：
ElBaradie, MA
机构：
[1] Sch. of Mech. and Mfg. Engineering, Dublin City University
来源：
WEAR | 1996年 / 195卷 / 1-2期
关键词：
tool-life; cutting tool; clearance angle; workpiece diameter;
D O I：
10.1016/0043-1648(95)06858-9
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The effect of varying the workpiece diameter on the cutting tool effective clearance angle has been investigated. Theoretical analysis of the relationship between the workpiece diameter and the cutting tool clearance angle is presented. To simulate this relationship experimentally, the cutting tool working normal clearance angle was kept constant, while varying the workpiece diameter, cutting speed and feed-rate. Tool-life cutting tests of cast iron bars were performed under dry cutting conditions using carbide tipped cutting tools. The experimental results revealed the existence of an optimum tool-life relationship under the above cutting conditions, indicating that the effective clearance angle varies with the varying of the workpiece diameter.
引用
收藏
页码：201 / 205
页数：5
相关论文
共 50 条
  • [1] Tool-Life of Wiper and Standard Cutting Tool in Finish Turning of SAE 4140
    Souza, A. J.
    Rosa, G. C.
    MATERIALS, INDUSTRIAL, AND MANUFACTURING ENGINEERING RESEARCH ADVANCES 1.1, 2014, 845 : 760 - 764
  • [2] Life Prediction of Cutting Tool by the Workpiece Cutting Condition
    de Mattos de Mesquita, Noemia Gomes
    Ferreira de Oliveira, Jose Eduardo
    Ferraz, Arimatea Quaresma
    MODELLING OF MACHINING OPERATIONS, 2011, 223 : 554 - +
  • [3] ON REDUCTION OF MATERIAL COSTS IN TOOL-LIFE TESTING
    KRISHNOM.C
    BREWER, RC
    MECHANICAL ENGINEERING, 1965, 87 (10) : 71 - &
  • [4] The effect of cutting tool material and edge geometry on tool life and workpiece surface integrity
    Hughes, J. I.
    Sharman, A. R. C.
    Ridgway, K.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2006, 220 (02) : 93 - 107
  • [5] DEVELOPMENT OF AN IN-PROCESS TOOL-LIFE DETECTION SYSTEM FOR CUTTING
    KIM, JD
    CHOI, JS
    PARK, SH
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1995, 47 (3-4) : 385 - 394
  • [6] Tool-life testing in the end milling of Inconel 718
    Alauddin, M
    ElBaradie, MA
    Hashmi, MSJ
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1995, 55 (3-4) : 321 - 330
  • [7] TOOL-LIFE DISTRIBUTIONS .2. MULTIPLE-INJURY TOOL-LIFE MODEL
    RAMALINGAM, S
    MECHANICAL ENGINEERING, 1977, 99 (07) : 100 - 100
  • [8] INFLUENCES OF SURFACE-FINISH AND TOOL-LIP PARAMETERS OF METAL-CUTTING TOOL ON TOOL-LIFE
    陈日曜
    ScienceinChina,SerA., 1964, Ser.A.1964 (11) : 1843 - 1849
  • [9] TOOL-LIFE DISTRIBUTIONS .2. MULTIPLE-INJURY TOOL-LIFE MODEL
    RAMALINGAM, S
    JOURNAL OF ENGINEERING FOR INDUSTRY-TRANSACTIONS OF THE ASME, 1977, 99 (03): : 523 - 531
  • [10] TOOL LIFE IN THE CUTTING OF WOOD BY A SUPER SURFACER .1. A PROPOSED TOOL-LIFE EQUATION BASED ON FRACTURES OF THE CUTTING EDGE
    INOUE, H
    MORI, M
    MOKUZAI GAKKAISHI, 1988, 34 (08): : 669 - 675
12345