Residual stresses in glass after molding and its influence on optical properties

被引：21
|
作者：
Yi, A. Y. [1 ]
Tao, B. [1 ]
Klocke, F. [2 ]
Dambon, O. [2 ]
Wang, F. [2 ]
机构：
[1] Ohio State Univ, Dept Integrated Syst Engn, 210 Baker Syst,1971 Neal Ave, Columbus, OH 43210 USA
[2] Fraunhofer Inst Prod Technol, D-54004 Aachen, Germany
来源：
1ST CIRP CONFERENCE ON SURFACE INTEGRITY (CSI) | 2011年 / 19卷
关键词：
Glass; Residual Stress; Finite Element Method (FEM); Optical;
D O I：
10.1016/j.proeng.2011.11.132
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Compression molding of glass optics is gradually becoming a viable manufacturing process for high precision optical lenses. However, during cooling, glass properties undergo a small amount of changes due to structural relaxation. As a result, residual stresses are trapped inside the molded glass lenses. In this research, compression molded lenses were studied using the birefringence method assisted by the finite element analysis. The experimental and simulation results showed that compression molding process can be controlled to a very high precision providing that the proper cooling is applied during cooling. In addition, numerical analysis using finite element analysis also provides a better understand of the cooling process and offers an economic solution for process optimization for low cost glass lens production. (C) 2012 Published by Elsevier Ltd. Selection and peer-review under responsibility of Prof. E. Brinksmeier
引用
收藏
页数：5
相关论文
共 50 条
  • [1] Numerical Simulation and Experimental Study of Residual Stresses in Compression Molding of Precision Glass Optical Components
    Chen, Yang
    Yi, Allen Y.
    Su, Lijuan
    Klocke, Fritz
    Pongs, Guido
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2008, 130 (05): : 0510121 - 0510129
  • [2] Effect of pipe expansion on the redistribution of residual stresses after molding
    Makhutov, Nikolay A.
    Neganov, Dmitry A.
    Studenov, Eugeny P.
    NAUKA I TEHNOLOGII TRUBOPROVODNOGO TRANSPORTA NEFTI I NEFTEPRODUKTOV-SCIENCE & TECHNOLOGIES-OIL AND OIL PRODUCTS PIPELINE TRANSPORTATION, 2020, 10 (02): : 122 - 126
  • [3] THE EFFECT OF RESIDUAL-STRESSES ON THE USER PROPERTIES OF GLASS TUBES
    ORLOV, DL
    MOISEEV, VG
    GOLOZUBOV, OA
    GOLENKOV, SV
    GLASS AND CERAMICS, 1985, 42 (5-6) : 260 - 263
  • [4] EFFECT OF RESIDUAL STRESSES ON THE USER PROPERTIES OF GLASS TUBES.
    Orlov, D.L.
    Moiseev, V.G.
    Golozubov, O.A.
    Golenkov, S.V.
    1600, (42): : 5 - 6
  • [5] CALCULATION OF RESIDUAL STRESSES IN GLASS
    NARAYANA.OS
    GARDON, R
    AMERICAN CERAMIC SOCIETY BULLETIN, 1968, 47 (09): : 857 - +
  • [6] CALCULATION OF RESIDUAL STRESSES IN GLASS
    NARAYANASWAMY, OS
    GARDON, R
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1969, 52 (10) : 554 - +
  • [7] Influence of Surface Laser Treatment on Mechanical Properties and Residual Stresses of Titanium and its Alloys
    Jazdzewska, Magdalena
    Majkowska-Marzec, Beata
    Ostrowski, Roman
    Olive, Jean-Marc
    ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2023, 17 (06) : 27 - 38
  • [8] INVESTIGATION OF THE THERMOSTRUCTURAL COMPONENT OF RESIDUAL-STRESSES IN OPTICAL-GLASS
    GOMELSKII, MS
    GRYAZNOV, VA
    BOGDANOVA, NG
    PETROVA, TI
    SHAKIROVA, RN
    SOVIET JOURNAL OF OPTICAL TECHNOLOGY, 1983, 50 (08): : 507 - 509
  • [9] Prediction model of residual stress during precision glass molding of optical lenses
    Fu, Hang
    Xue, Changxi
    Liu, Yue
    Cao, Bo
    Lang, Changfu
    Yang, Chao
    APPLIED OPTICS, 2022, 61 (05) : 1194 - 1202
  • [10] EFFECT OF MOLDING CONDITIONS ON RESIDUAL-STRESSES IN POWDER INJECTION-MOLDING
    KOSTIC, B
    ZHANG, T
    EVANS, JRG
    INTERNATIONAL JOURNAL OF POWDER METALLURGY, 1993, 29 (03): : 251 - 256
12345