Steel-bonded Cemented Carbide Cladding Prepared by Technological Combination of Powder Explosive Compaction and Liquid Sintering

被引：0
|
作者：
Gao, Zhiguo [1 ]
Wang, Hua [1 ]
Feng, Yanqing [2 ]
Zhao, Yisheng [3 ]
机构：
[1] Baotou Steel & Iron Grp, Baotou, Peoples R China
[2] Univ Sci & Technol Beijing, Beijing, Peoples R China
[3] Shenzhen Polytech, Shenzhen, Peoples R China
来源：
ADVANCED DESIGN TECHNOLOGY, PTS 1-3 | 2011年 / 308-310卷
关键词：
Steel-bonded cemented carbide cladding; Explosive compaction; Liquid sintering; WC-CO HARDMETALS; BEHAVIOR;
D O I：
10.4028/www.scientific.net/AMR.308-310.947
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Steel-bonded cemented carbide sheet considered as cladding was successfully bonded with carbon steel plate by a technological combination of powder explosive compaction and liquid sintering. The microstructural interface between steel-bonded cemented carbide cladding and carbon steel plate was characterized by SEM, EDS analysis and hardness testing. The results showed that the gradient distributions of the elements Fe, C and W were found in the normal direction of the interface. The element W permeated about 100 mu m in depth through the side of carbon steel. The improved hardness of about 600 similar to 700HV of cladding was attributed to multiple carbides.
引用
收藏
页码：947 / +
页数：2
相关论文
共 22 条
  • [1] Effect of microwave sintering temperature on microstructure and properties of WC steel-bonded cemented carbide
    Luo, Jun-Ming
    Wei, Zheng
    Ai, Yun-Long
    Zhang, Jian-Ping
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2011, 32 (07): : 31 - 36
  • [2] Effect of WC contents on microstructure and properties of steel-bonded cemented carbide
    Luo, Junming
    Xu, Jilin
    Wei, Zheng
    FRONTIERS OF MECHANICAL ENGINEERING AND MATERIALS ENGINEERING, PTS 1 AND 2, 2012, 184-185 : 850 - 853
  • [3] Study of carbides characteristic in a rare-earth steel-bonded cemented carbide prepared by electroslag melting
    Department of Material Science and Engineering, Hefei University of Technology, Hefei 230009, China
    不详
    Cailiao Rechuli Xuebao, 2006, 6 (74-77+98):
  • [4] Fabricating and composite process study of steel-bonded cemented carbide TLMW50/Carbon steel
    Gao Zhiguo
    Yang Dixin
    Wei Shizhong
    Long Rui
    RARE METAL MATERIALS AND ENGINEERING, 2006, 35 : 141 - 143
  • [5] Preparation of TiC steel-bonded cemented carbide-steel composite hammerhead by solid-liquid phase recombination method
    Fan Xingping
    MATERIALS RESEARCH EXPRESS, 2019, 6 (10):
  • [6] TEM research on microstructure of TiC-50Nb steel-bonded cemented carbide
    Wu, Qiang
    Hu, Zhenghua
    Xiao, Jianzhong
    Cui, Kun
    Fenmo Yejin Jishu/Powder Metallurgy Technology, 1993, 11 (03): : 202 - 207
  • [7] Steel-bonded cemented carbide GT35 by in-situ reduction of natural ilmenite
    Wu, Yi
    Yin, Chuanqiang
    Zou, Zhengguang
    Li, Xiaomin
    Shen, Yufang
    Zhou, Lang
    High-Performance Ceramics IV, Pts 1-3, 2007, 336-338 : 1390 - 1393
  • [8] The microstructure evolution and dimensional stability of TiC steel-bonded cemented carbide during stabilizing heat treatments
    Tu, Xiaoxuan
    Xiao, Lairong
    Cai, Zhenyang
    Peng, Zhenwu
    Zeng, Delu
    Ren, Penghe
    Zhao, Xiaojun
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2023, 113
  • [9] Thermodynamics on steel-bonded cemented carbide GT35 by in-situ carbothermic reduction form ilmenite
    Wu, Yi
    Zou, Zheng-Guang
    Yin, Chuan-Qiang
    Li, Xiao-Min
    Zhou, Lang
    Cailiao Gongcheng/Journal of Materials Engineering, 2006, (01): : 12 - 15
  • [10] Microstructure and mechanical properties of TiC steel-bonded carbides prepared by two-step sintering technique
    Guo, Xiaoge
    Zheng, Yong
    Zhang, Guotao
    Wu, Hao
    Yang, Zhengkai
    Gong, Ao
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2020, 93
123